Field attachable connector, M12 Push-Pull
Technical Specifications:
| Width | 49 mm |
| Width (inches) | 1.929 inch |
| Diameter | 19.9 mm |
| Net weight | 50 g |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Cable diameter, max. | 8 mm |
| Cable diameter, min. | 4 mm |
| Category | Cat.5 (ISO/IEC 11801) |
| Coding | D-coded |
| Conductor cross-section, max. | 0.75 mm² |
| Conductor cross-section, min. | 0.14 mm² |
| Connection cross-section, max. | 0.75 mm² |
| Connection cross-section, min. | 0.14 mm² |
| Contact material | CuSn |
| Contact surface | Ni/Au |
| Gender of contact | Male |
| Housing main material | PA 66 zinc diecast nickel-plated |
| Insulation strength | ≥ 100 MΩ |
| Number of poles | 4 |
| Plugging cycles | ≥ 100 |
| Pollution severity | 3 |
| Protection degree | IP67 IP65 |
| Rated current | 4 A |
| Shield connection | Yes |
| Temperature range of housing | -40 … +85 ° C |
| Threaded ring material | Diecast zinc |
| Type of connection | PUSH IN |
| Number of poles | 4 |
| Connection 1 | M12 |
| Connection 2 | PUSH IN |
| UL 94 flammability rating | V-0 |
| Housing main material | PA 66 zinc diecast nickel-plated |
| Category | Cat.5 (ISO/IEC 11801) |
| Connection thread | M12 Push-Pull |
| Contact material | CuSn |
| Contact surface | Ni/Au |
| Wire connection cross section, finely stranded, min. | 0.14 mm² |
| Wire connection cross section, finely stranded, max. | 0.75 mm² |
| Contact holder materials | PA |
| Shielding | Yes |
| Protection degree | IP67 IP65 |
| Plugging cycles | ≥ 100 |
| Insulation strength | ≥ 100 MΩ |
| Connector standard | IEC 61076-2-010 IEC 61076-2-101 |
| Connector standard | IEC 61076-2-010 IEC 61076-2-101 |
| Fire safety for railway vehicles | DIN EN 45545-2 |
| Shock and vibration proof according to | EN 50155:2001 |
Reviews
There are no reviews yet.