Weidmueller KMVT LI 2.4 EP/SW

Request a price

KMVT LI 2.4 EP/SW

SKU: 249300000.0 Category: Brand:

Feed-through terminal block, Termipoint connection, black, 0.5 mm², 12 A, 800 V, Number of connections: 2

Technical Specifications:

Depth 6 mm
Depth (inches) 0.236 inch
Height 70 mm
Height (inches) 2.756 inch
Width 6 mm
Width (inches) 0.236 inch
Net weight 15.84 g
Storage temperature -25 °C…55 °C
Ambient temperature -5 °C…40 °C
Continuous operating temp., min. -60 °C
Continuous operating temp., max. 160 °C
RoHS Compliance Status Compliant without exemption
REACH SVHC No SVHC above 0.1 wt%
Material Epoxy resin, EP
Colour black
UL 94 flammability rating V-0
Version with cable-lug connection
End cover plate required No
Number of potentials 1
Number of levels 1
Number of clamping points per level 2
Number of potentials per tier 1
Levels cross-connected internally No
PE connection No
Rail TS 32
N-function No
PE function No
PEN function No
Explosion-tested version No
Number of similar terminals 1
Open sides right
Type of mounting Snap-on
Connection type, additional connection Screw connection
Clamping range, max. 2.5 mm²
Clamping range, min. 0.5 mm²
Connection cross-section, stranded, max. 2.5 mm²
Connection cross-section, stranded, min. 0.5 mm²
Connection direction top
Number of connections 2
Type of connection Termipoint connection
Wire connection cross section AWG, max. AWG 14
Wire connection cross section AWG, min. AWG 20
Wire connection cross section, finely stranded, max. 2.5 mm²
Wire connection cross section, finely stranded, min. 0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 0.5 mm²
Wire connection cross-section, solid core, max. 2.5 mm²
Wire connection cross-section, solid core, min. 0.5 mm²
Rail TS 32
Standards In accordance with IEC 60947-7-1
Wire connection cross section AWG, max. AWG 14
Wire connection cross section AWG, min. AWG 20
Rated cross-section 0.5 mm²
Rated voltage 800 V
Rated DC voltage 800 V
Rated current 12 A
Current at maximum wires 12 A
Standards In accordance with IEC 60947-7-1
Volume resistance according to IEC 60947-7-x 5.33 mΩ
Rated impulse withstand voltage 8 kV
Power loss in accordance with IEC 60947-7-x 0.19 W
Pollution severity 3

Reviews

There are no reviews yet.

Be the first to review “Weidmueller KMVT LI 2.4 EP/SW”

Your email address will not be published. Required fields are marked *