Bolt-type screw terminals, Feed-through terminal, Screw connection
Technical Specifications:
| Depth | 96.1 mm |
| Depth (inches) | 3.783 inch |
| Height | 220 mm |
| Height (inches) | 8.661 inch |
| Width | 180 mm |
| Width (inches) | 7.087 inch |
| Diameter | 11 mm |
| Mounting dimension – height | 130 mm |
| Mounting dimension – width | 155 mm |
| Net weight | 3,500 g |
| Continuous operating temp., min. | -50 °C |
| Continuous operating temp., max. | 140 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Colour | red |
| UL 94 flammability rating | V-0 |
| End cover plate required | No |
| Number of potentials | 2 |
| Number of levels | 1 |
| Number of clamping points per level | 2 |
| Levels cross-connected internally | Yes |
| Rail | Mounting plate |
| Explosion-tested version | No |
| Cable lug to DIN 46234 | 10…240 mm² |
| Clamping range, bolted connection , max. | 240 mm² |
| Clamping range, bolted connection , min. | 10 mm² |
| Clamping range, max. | 240 mm² |
| Clamping range, min. | 10 mm² |
| Clamping screw | M 12 |
| Connection cross-section, finely stranded, max. | 240 mm² |
| Connection cross-section, finely stranded, min. | 10 mm² |
| Connection direction | on side |
| Number of connections | 4 |
| Stud size for spade connection | M 12 |
| Tightening torque, max. | 65 Nm |
| Tightening torque, min. | 63 Nm |
| Type of connection | Screw connection |
| Wire connection cross section AWG, max. | kcmil 500 |
| Wire connection cross section AWG, min. | AWG 6 |
| Wire connection cross section, finely stranded, max. | 240 mm² |
| Wire connection cross section, finely stranded, min. | 10 mm² |
| Diameter | 11 mm |
| Rail | Mounting plate |
| Standards | EN 45545-2:2020 NFPA 130 ASTME 162/ 662 BSS 7239/ 7242 |
| Wire connection cross section AWG, max. | kcmil 500 |
| Wire connection cross section AWG, min. | AWG 6 |
| Rated cross-section | 240 mm² |
| Rated voltage | 4,000 V |
| Voltage with epoxy resin partition plate | 4,000 V |
| Rated current | 600 A |
| Current at maximum wires | 600 A |
| Standards | EN 45545-2:2020 NFPA 130 ASTME 162/ 662 BSS 7239/ 7242 |
| Rated impulse withstand voltage | 30 kV |
| Impulse voltage with epoxy resin partition plate | 30 kV |
| Pollution severity | 3 |
Reviews
There are no reviews yet.