OMNIMATE Power – series WGK, Feed-through terminal, Rated cross-section: 95 mm², Screw connection, Wemid (PA), black, Direct mounting, Feed-through (bushing)
Technical Specifications:
| Height | 74 mm |
| Height (inches) | 2.913 inch |
| Height of lowest version | 74 mm |
| Width | 25 mm |
| Width (inches) | 0.984 inch |
| Length | 27.4 mm |
| Length (inches) | 1.079 inch |
| Net weight | 182.7 g |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Product family | OMNIMATE Power – series WGK |
| Wire connection method | Cable lug: ring cable / spade lug |
| Conductor outlet direction | 180° |
| Number of poles | 1 |
| Pin series quantity | 1 |
| Fitted by customer | No |
| Tightening torque, min. | 15 Nm |
| Tightening torque, max. | 20 Nm |
| Clamping screw | M8/Hexagon |
| Stripping length | 27 mm |
| Touch-safe protection acc. to DIN VDE 0470 | IP 20 |
| Protection degree | IP20 |
| Type of connection 1 | Clamping yoke |
| Type of connection 2 | Screw connection |
| Insulating material | Wemid (PA) |
| Colour | black |
| Colour chart (similar) | RAL 9011 |
| UL 94 flammability rating | V-0 |
| Contact material | Cu-alloy |
| Contact surface | tinned |
| Storage temperature, min. | -40 °C |
| Storage temperature, max. | 70 °C |
| Operating temperature, min. | -50 °C |
| Operating temperature, max. | 120 °C |
| Temperature range, installation, min. | -25 °C |
| Temperature range, installation, max. | 120 °C |
| Clamping range, min. | 35 mm² |
| Clamping range, max. | 95 mm² |
| Wire connection cross section AWG, min. | AWG 4 |
| Wire connection cross section AWG, max. | AWG 4/0 |
| Solid, min. H05(07) V-U | 35 mm² |
| Solid, max. H05(07) V-U | 95 mm² |
| Stranded, min. H07V-R | 35 mm² |
| Stranded, max. H07V-R | 95 mm² |
| Flexible, min. H05(07) V-K | 35 mm² |
| Flexible, max. H05(07) V-K | 95 mm² |
| w. plastic collar ferrule, DIN 46228 pt 4, min. | 35 mm² |
| w. plastic collar ferrule, DIN 46228 pt 4, max. | 95 mm² |
| w. wire end ferrule, DIN 46228 pt 1, min. | 35 mm² |
| w. wire end ferrule, DIN 46228 pt 1, max. | 95 mm² |
| Reference text | Length of ferrules is to be chosen depending on the product and the rated voltage. The outside diameter of the plastic collar should not be larger than the pitch (P) |
| tested acc. to standard | IEC 60664-1 |
| Rated current, min. number of poles (Tu=20°C) | 232 A |
| Rated current, max. number of poles (Tu=20°C) | 232 A |
| Rated voltage for surge voltage class / pollution degree III/3 | 1,000 V |
| Rated impulse voltage for surge voltage class/ contamination degree III/3 | 8 kV |
| Rated voltage (Use group B / CSA) | 600 V |
| Rated voltage (Use group C / CSA) | 600 V |
| Rated voltage (Use group D / CSA) | 300 V |
| Rated current (Use group B / CSA) | 230 A |
| Rated current (Use group C / CSA) | 230 A |
| Rated current (Use group D / CSA) | 10 A |
| Wire cross-section, AWG, min. | AWG 4 |
| Wire cross-section, AWG, max. | AWG 4/0 |
| Institute (cURus) | CURUS |
| Certificate No. (cURus) | E60693 |
| Rated voltage (Use group B / UL 1059) | 600 V |
| Rated voltage (Use group C / UL 1059) | 600 V |
| Rated voltage (Use group D / UL 1059) | 300 V |
| Rated current (Use group B / UL 1059) | 230 A |
| Rated current (Use group C / UL 1059) | 230 A |
| Rated current (Use group D / UL 1059) | 10 A |
| Wire cross-section, AWG, min. | AWG 4 |
| Wire cross-section, AWG, max. | AWG 4/0 |
| Reference to approval values | Specifications are maximum values, details – see approval certificate. |
| Packaging | Box |
| VPE length | 270 mm |
| VPE width | 118 mm |
| VPE height | 99 mm |
| Notes | Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Colours: SW = black; GN/YL = green/yellow; GY = grey Additional variants on request WGK: Rated voltage plastic walls: 1–6 mm = 1000 V; metal walls: < 1 mm = 1000 V; metal walls: 1–3.5 mm = 800 V; metal walls: 3.5–5.5 mm = 690 V Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months |
Reviews
There are no reviews yet.