Klippon TB FS (Terminal Box – Fixing Screw), Empty enclosure, stainless steel enclosure, Height: 306 mm, Width: 306 mm, Depth: 200 mm, Gland plates: Bottom, Material: Stainless steel 1.4404 (316L), electropolished, silver
Technical Specifications:
| Depth | 200 mm |
| Depth (inches) | 7.874 inch |
| Height | 306 mm |
| Height (inches) | 12.047 inch |
| Width | 306 mm |
| Width (inches) | 12.047 inch |
| Mounting dimension – height | 203 mm |
| Mounting dimension – width | 332 mm |
| Net weight | 6,120 g |
| Operating temperature | -60 °C…135 °C |
| Note room temperature (service) | Limited to IP66 protection when used in temperatures greater than 105 °C. |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 8d5fcdfe-c58e-44e1-a6b4-74d2bbccc9dd |
| M12 | 33 |
| M16 | 22 |
| M20 | 14 |
| M25 | 12 |
| M32 | 6 |
| M40 | 5 |
| M50 | 2 |
| M63 | 2 |
| M75 | 1 |
| M12 | 33 |
| M16 | 22 |
| M20 | 14 |
| M25 | 12 |
| M32 | 6 |
| M40 | 5 |
| M50 | 2 |
| M63 | 2 |
| M75 | 1 |
| M12 | 40 |
| M16 | 26 |
| M20 | 17 |
| M25 | 14 |
| M32 | 8 |
| M40 | 6 |
| M50 | 3 |
| M63 | 2 |
| M75 | 2 |
| Approval conditions | ATEX CCoE cULus DNV IECEX INMETRO KC NEPSI CCC UL AEx Class Div. UL AEx Class Zone |
| Attestation of Conformatiy No. (AoC) | DE PS261X 160309 001ISS06 |
| Certificate No. (ATEX) | KEMA10ATEX0046U |
| Certificate no. (cULus) | E256877 |
| Certificate No. (DNV) | TAE000013S |
| Certificate No. (IECEX) | IECEXKEM10.0015U |
| Certificate no. (INMETRO) | IEX13.0006U |
| Certificate No. Electronic Box (NEPSI) | 2020322303003289 |
| Certificate no. empty enclosure (ATEX) | IBExU14ATEX1028 U |
| Certificate no. empty enclosure (ECAS) | 21-09-25241/E21-09-053807 |
| Certificate no. empty enclosure (IECEx) | IECEx IBE 14.0004U |
| Certificate no. empty enclosure (INMETRO) | LMP 21.0016U |
| Certificate no. Terminal Box (AEx) | E223792 |
| Certificate no. Terminal Box (ATEX) | IBExU14ATEX1050 |
| Certificate no. Terminal Box (IECEx) | IECEXIBE14.0013 |
| Certificate no. Terminal Box (INMETRO) | LMP 21.0017 |
| Certificate no. Terminal Box (KOSHA) | 16-AV4BO-0245X |
| Certificate No. UL 508A | E223801 |
| Certificate No. UL Haz.Loc. | E223792 |
| Certificate No. UL Ord.Loc. | E243298 |
| Certificate No. UL Terminal Box | E223792 |
| Declaration of Conformatiy No. (DoC LVD) | DE PS261X 160412 001ISS03 |
| Access opening height | 276 mm |
| Access opening width | 276 mm |
| AF size | 10 mm |
| Areas of use | Explosive risk zone Process industry Oil and gas industry Chemical industry Offshore Onshore |
| Dimension of box | 460x500x290 |
| Enclosure attachment | 4 welded-on mounting feet with 11 mm holes (2 slotted feet and 2 cross-shaped feet) |
| Flange plate | Yes |
| Flange plate mounting | M6 hexagonal head screws 10 SW |
| Gland plates | Bottom |
| Impact resistance | 7 J ATEX version 10 J version standard |
| Integral fixing | 4, 6 or 9 stud bolts M6 inner (female) thread |
| Lid attachment | M6 hex-head slotted screws SW10 |
| Material | Stainless steel 1.4404 (316L) |
| Material thickness of cover | 1.5 mm |
| Material thickness of enclosure | 1.5 mm |
| Material thickness of flange | 3 mm |
| Max. payload | 37 kg |
| Note protection class | If used in temperature ranges above 105 °C, IP protection is limited to IP 66. |
| Number of lid screws | 4 |
| Operating temperature, max. | 135 °C |
| Operating temperature, min. | -60 °C |
| Overall dimensions | 317 x 357 x 208.5 |
| Position PE bolts | Enclosure side C |
| Protection class (UL) | Type 3 Type 4X Type 12 |
| Protection degree | IP66 IP67 |
| Seal material | Silicone |
| Standards | DIN EN 62208 – Empty enclosure standard DIN EN 15085-2 EN 60079-0 EN 60079-7 EN 60079-31 IEC 60079-0 IEC 60079-7 IEC 60079-31 |
| Surface finish | electropolished |
| Torque for lid screws | 2.5 Nm |
| WDU 10 / ZDU 10 | 1×22 |
| WDU 16 / ZDU 16 | 1×18 |
| WDU 2,5 / ZDU 2,5 / IDU 2,5 | 2×43 |
| WDU 35 / ZDU 35 | 1×13 |
| WDU 4 / ZDU 4 | 2×36 |
| WDU 6 / ZDU 6 | 2×27 |
| Earth, enclosure, internal | Welded-on M6 stainless-steel earth stud in enclosure body and lid. Continuous M10 earth stud in body enclosure |
| WDU 10 / ZDU 10 | 1×22 |
| WDU 16 / ZDU 16 | 1×19 |
| WDU 2,5 / ZDU 2,5 / IDU 2,5 | 2×41 |
| WDU 35 / ZDU 35 | 1×14 |
| WDU 4 / ZDU 4 | 2×34 |
| WDU 6 / ZDU 6 | 2×25 |
Reviews
There are no reviews yet.