Klippon BDX (compensating elements), Compensating element, M 20, 15 mm, IP66, Stainless steel 1.4404 (316L)
Technical Specifications:
| Height | 12 mm |
| Height (inches) | 0.472 inch |
| Width | 27 mm |
| Width (inches) | 1.063 inch |
| Length | 22 mm |
| Length (inches) | 0.866 inch |
| Net weight | 60.2 g |
| Operating temperature | -60 °C…200 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Approval conditions | ATEX IECEX UL AEx Class Div. UL AEx Class Zone |
| Certificate no. cable gland (ATEX) | CML 19ATEX3347X |
| Certificate no. cable gland (CSA) | E340660 |
| Certificate no. cable gland (IECEx) | IECEx CML 19.0105X |
| Identification | Ex e IIC Gb Ex ta IIIC Da |
| AF size 1 | 27 mm |
| Air flow | 0.25 l / 1 h |
| Cable glands | M 20 |
| Explosion protection type | Improved safety Ex e |
| External thread | M 20 |
| Filter | Bronze insert (90% copper, 10% tin) |
| Halogen | halogen-free |
| Head diameter | 26.2 mm |
| Impact resistance | 7 J ATEX version |
| Length of thread | 15 mm |
| Material | Stainless steel 1.4404 (316L) |
| Note protection class | – The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. – The supplied assembly instructions must be read prior to installation and strictly adhered to. – The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. |
| O-Ring | Silicone |
| Operating temperature range, max. | 200 °C |
| Operating temperature range, min. | -60 °C |
| Pitch of thread | 1.5 mm |
| Protection class (UL) | Type 4 |
| Protection degree | IP66 |
| Protection degree with GWDR | IP66 |
| Sealing | Silicone |
| Silicone | Yes |
| Standards | IEC 60079-0 IEC 60079-7 IEC 60079-31 |
| Tightening torque | 5 Nm |
| Torque for connecting adapter, max. | 5 Nm |
| Torque for connecting adapter, min. | 5 Nm |
| Torque for lock nut, max. | 5 Nm |
| Torque for lock nut, min. | 5 Nm |
Reviews
There are no reviews yet.