System cable, M12 D-code – IP 67 angled pin, RJ45 IP 20, Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B), 20 m
Technical Specifications:
| Length | 20 m |
| Length (inches) | 787.402 inch |
| Net weight | 1,156.32 g |
| Storage temperature | -40 °C…80 °C |
| Installation temperature | -40 °C…80 °C |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 67cf1078-beca-4687-860b-dc475a6ec24a |
| Standard, additional standards | UL-File E11901 Vol.1 Sec.12 Page 1 UL-File E116441 Vol.1 Sec.6 Page 8 |
| Standard, assembly | UL-Style 21694 |
| Standard, insulating material | DIN EN 50290-2-23 (VDE 0819) Table 2/A (HD 624.3) |
| Standard, shielding material | DIN EN 13602 Cu-ETP-A..B |
| Standard, wire material | DIN EN 13602 Cu-ETP-A |
| Standard, additional standards | UL-File E11901 Vol.1 Sec.12 Page 1 UL-File E116441 Vol.1 Sec.6 Page 8 |
| Standard, assembly | UL-Style 21694 |
| Standard, insulating material | DIN EN 50290-2-23 (VDE 0819) Table 2/A (HD 624.3) |
| Standard, shielding material | DIN EN 13602 Cu-ETP-A..B |
| Standard, wire material | DIN EN 13602 Cu-ETP-A |
| Arrangement of wire cores | Star-quad |
| Colour sequence or wires – wire pairs | white, yellow, blue, orange |
| Complete shielding | Aluminium foil Shielding braid made from copper wiring |
| Cross-section | 4*AWG 22/7 – 0.32 mm² |
| Diameter of inner sheathing | 4.05 mm |
| Filler | As central element |
| Overlap of shielding braid | 85 % |
| Sheath diameter, max. | 6.7 mm |
| Sheath diameter, min. | 6.3 mm |
| Sheathing colour | green (RAL 6018) |
| Sheathing material thickness | 0.9 mm |
| Shielding | SF/UTP |
| Shielding braid thickness | 0.13 mm |
| Standard designations | 2YY(ST)CY 2x2x0,75/1,5-100 LI VZN GN |
| Strands | 7 |
| Wire material | Stranded tin-plated copper wire |
| Category | Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B) |
| Characteristic impedance | 100 ± 5 Ω at 100MHz |
| Loop resistance | 120 Ω/km |
| Operating voltage (UL rating) | 600 V |
| Operating voltage, UL | 600 V |
| Test voltage wire-wire-shield | 2000 Veff, 50 Hz, 1 min |
| Transfer impedance | 20 mΩ/m at 10 MHz |
| Abrasion resistance | good |
| Halogen | Yes |
| Min. bending radius, once only | 3.5 *diameter |
| Min. bending radius, repetitive | 7.5 x cable diameter |
| Resistance to spread of flame | in accordance with IEC 60332-1 / UL 1685 |
Reviews
There are no reviews yet.