Patch cable, RJ45 IP 20, RJ45 IP 20, 20 m Class EA (ISO/IEC 11801 2010), LSZH, 0.7 m
Technical Specifications:
| Length | 0.7 m |
| Length (inches) | 27.559 inch |
| Net weight | 43 g |
| Storage temperature | -20 °C…60 °C |
| Operating temperature | -20 °C…60 °C |
| Installation temperature | 0 °C…50 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Current-carrying capacity at 50 °C | 1 A |
| PoE / PoE+ | conforming to IEEE 802.3at |
| Application-specific communication cable facilities | ANSI / TIA / EIA-568-B.2-10 ISO / IEC 11801:2002 EN50173-1:2007 |
| Certificate no. (cULus) | E316369 |
| Connector standard | IEC 60603-7-51 |
| Connector standard | IEC 60603-7-51 |
| Arrangement of wire cores | Twisted pair |
| Colour sequence or wires – wire pairs | white – blue, white – orange, white – green, white – brown |
| Complete shielding | Shielding braid made from copper wiring |
| Cross-section | 4*2*AWG 27/7 – 4*2*0.1 mm² |
| Insulation | PE |
| Insulation cross-section | 1.04 mm |
| Material sheath | LSZH |
| Number of wires | 8 |
| Overlap of shielding braid | 60 % |
| Sheath diameter, max. | 5.9 mm |
| Sheath diameter, min. | 5.5 mm |
| Sheathing colour | grey |
| Shielding | S/FTP |
| Strands | 7 |
| Wire pair shielding | Aluminium foil |
| Capacity at 1 kHz | 46 nF/km |
| Category | 20 m Class EA (ISO/IEC 11801 2010) |
| Characteristic impedance | 100 ± 15 Ω at 1–100 MHz |
| Coupling attenuation up to 1000 MHz | 80 dB |
| Coupling resistance at 10 MHz / m | 5 mΩ |
| Delay skew | 2.5 ns/100m |
| Operating voltage | 50 V DC |
| Operating voltage (UL rating) | 30 V AC / 42.4 V DC |
| Resistance differential | 5 % |
| Separating class according to EN 50174-2 | d |
| Test voltage wire-wire-shield | 2.5 kV / DC for 2 sec |
| Transmission rate | 10 Gbit/s |
| Colour | grey |
| Halogen | halogen-free, according to IEC 60754-2 |
| Min. bending radius, once only | 4 x cable diameter |
| Resistance to spread of flame | in accordance with IEC 60332-2-2 in accordance with IEC 60332-1-2 in accordance with IEC 60332-3-24 in accordance with UL 2556 (FT1) |
| Plug left | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
| Plug right | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
| Plug left | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
| Plug right | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
Reviews
There are no reviews yet.