System cable, Cat.7 (ISO/IEC 11801), PUR, 100 m
Technical Specifications:
| Length | 100 m |
| Length (inches) | 3,937.008 inch |
| Net weight | 4,300 g |
| Storage temperature | -40 °C…80 °C |
| Operating temperature | -40 °C…80 °C |
| Installation temperature | -15 °C…60 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Halogen | halogen-free, according to IEC 60754-2 |
| Insulation | PE |
| Number of poles | 8 |
| Resistance to oils | in accordance with IEC 60811-2-1 |
| Resistance to spread of flame | in accordance with IEC 60332-1 |
| Sheathing colour | green (RAL 6018) |
| Shielded | Yes |
| Test voltage wire-wire-shield | 700 V AC |
| Corrosiveness of fumes | to IEC 60754-2 |
| Generic communication cable facilities | EN 50173-1:2007 ISO / IEC 11801:2002 |
| Standard, assembly | UL-Style 20963 (80°C/30V) |
| Corrosiveness of fumes | to IEC 60754-2 |
| Generic communication cable facilities | EN 50173-1:2007 ISO / IEC 11801:2002 |
| Standard, assembly | UL-Style 20963 (80°C/30V) |
| Arrangement of wire cores | Twisted pair |
| Colour sequence or wires – wire pairs | white – blue, white – orange, white – green, white – brown |
| Complete shielding | Shielding braid made from copper wiring |
| Cross-section | 4*2*AWG 26/7 – 4*2*0.128 mm² |
| Insulation | PE |
| Insulation cross-section | 1.04 mm |
| Material sheath | PUR |
| Sheath diameter, max. | 6.5 mm |
| Sheath diameter, min. | 6.1 mm |
| Sheathing colour | green (RAL 6018) |
| Shielding | S/FTP |
| Shielding braid thickness | 0.1 mm |
| Standard designations | IE-7CC4x2xAWG26/7-PUR LI02YSC11Y PIMF 26 AWG E197099 (UL) AWM STYLE 20963 80°C 30V S/FTP |
| Strands | 7 |
| Wire material | Stranded tin-plated copper wire |
| Wire pair shielding | Aluminium foil |
| Capacity at 1 kHz | 45 nF/km |
| Category | Cat.7 (ISO/IEC 11801) |
| Characteristic impedance | 100 ± 5 Ω at 100MHz |
| Delay skew | 3 ns/100m |
| Loop resistance | 290 Ω/km |
| Signal propagation time | 4.5 ns/m |
| Test voltage wire-wire-shield | 700 V AC |
| Transfer impedance | 15 mΩ/m at 1 MHz 10 mΩ/m at 10 MHz 30 mΩ/m at 30 MHz |
| Abrasion resistance | very good |
| Corrosiveness of fumes | to IEC 60754-2 |
| Halogen | halogen-free, according to IEC 60754-2 |
| Min. bending radius, once only | 5 x cable diameter |
| Min. bending radius, repetitive | 10 x cable diameter |
| Pulling force | ≤ 100 N |
| Resistance to oils | in accordance with IEC 60811-2-1 |
| Resistance to spread of flame | in accordance with IEC 60332-1 |
Reviews
There are no reviews yet.