System cable, Cat.7 (ISO/IEC 11801), LSZH, 305 m
Technical Specifications:
| Length | 305 m |
| Length (inches) | 12,007.874 inch |
| Net weight | 12,360 g |
| Storage temperature | -20 °C…60 °C |
| Operating temperature | -20 °C…60 °C |
| Installation temperature | 0 °C…50 °C |
| RoHS Compliance Status | Compliant |
| REACH SVHC | No SVHC above 0.1 wt% |
| Halogen | No |
| Insulation | PE |
| Number of wires | 8 |
| Resistance to spread of flame | in accordance with IEC 60332-1 |
| Sheathing colour | yellow |
| Shielded | Yes |
| Test voltage wire-wire-shield | 2.5 kV / DC for 2 sec |
| Generic communication cable facilities | ISO / IEC 11801:2002 EN 50173-1:2007 |
| Impervious to smoke | to IEC 60754-2 |
| Certificate no. (cULus) | E349758 |
| Generic communication cable facilities | ISO / IEC 11801:2002 EN 50173-1:2007 |
| Impervious to smoke | to IEC 60754-2 |
| Arrangement of wire cores | Twisted pair |
| Colour sequence or wires – wire pairs | white – blue, white – orange, white – green, white – brown |
| Complete shielding | Shielding braid made from copper wiring |
| Copper diameter | 0.43 mm |
| Cross-section | 4*2*AWG 27/7 – 4*2*0.1 mm² |
| Insulation | PE |
| Insulation cross-section | 1 mm |
| Material sheath | LSZH |
| Number of wires | 8 |
| Overlap of shielding braid | 60 % |
| Sheath diameter | 6.0 mm |
| Sheathing colour | yellow |
| Shielding | S/FTP |
| Strands | 7 |
| Wire material | Non-insulated copper wire |
| Capacity at 1 kHz | 44 nF/km |
| Category | Cat.7 (ISO/IEC 11801) |
| Characteristic impedance | 100 ± 5 Ω at 100MHz |
| Coupling attenuation up to 1000 MHz | 80 dB |
| Coupling resistance at 10 MHz / m | 5 mΩ |
| Delay skew | 2.5 ns/100m |
| Loop resistance | 170 Ω/km |
| Operating voltage | 125 V max. |
| Resistance differential | 5 % |
| Separating class according to EN 50174-2 | d |
| Shield attenuation up to 1000 MHz | 60 dB |
| Test voltage wire-wire-shield | 2.5 kV / DC for 2 sec |
| Halogen | No |
| Impervious to smoke | to IEC 60754-2 |
| Min. bending radius, once only | 5 x cable diameter |
| Pulling force | max. 40 N |
| Resistance to spread of flame | in accordance with IEC 60332-1 |
Reviews
There are no reviews yet.