Neutral conductor modular terminal, Screw connection, 35, 400 V, 125 A, TS 35, blue
Technical Specifications:
| Depth | 50.5 mm |
| Depth (inches) | 1.988 inch |
| Depth including DIN rail | 51 mm |
| Height | 66 mm |
| Height (inches) | 2.598 inch |
| Width | 16 mm |
| Width (inches) | 0.63 inch |
| Net weight | 63.9 g |
| Storage temperature | -25 °C…55 °C |
| Ambient temperature | -5 °C…40 °C |
| Continuous operating temp., min. | -50 °C |
| Continuous operating temp., max. | 120 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Material | Wemid |
| Colour | blue |
| UL 94 flammability rating | V-0 |
| Version | Screw connection with busbar connection 10×3 in closed state |
| End cover plate required | No |
| Number of potentials | 1 |
| Number of levels | 1 |
| Number of clamping points per level | 1 |
| Number of potentials per tier | 1 |
| Levels cross-connected internally | No |
| PE connection | No |
| Rail | TS 35 |
| N-function | Yes |
| PE function | No |
| PEN function | No |
| Cross-section for connected wire, stranded, two clampable wires, max. | 16 mm² |
| Cross-section for connected wire, stranded, two clampable wires, min. | 16 mm² |
| Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. | 16 mm² |
| Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min. | 2.5 mm² |
| Wire connection cross section, finely stranded, two clampable wires, min. | 4 mm² |
| Wire cross-section, finely stranded, two clampable wires, max. | 16 mm² |
| Explosion-tested version | No |
| Installation advice | Busbar |
| Number of similar terminals | 1 |
| Open sides | closed |
| Type of mounting | Snap-on |
| Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. | 35 mm² |
| Blade size | 6.5 x 1.2 mm |
| Clampable conductor | Connection specification: Screw connection Cross-section for conductor connection: Type: solid, H05(07) V-U min.: 2.5 mm² max.: 16 mm² nominal: 16 mm² wire end ferrule: Stripping length: min.: 18 mm max.: 18 mm nominal: 18 mm Tightening torque: min.: 4 Nm max.: 5 Nm Connection specification: Screw connection Cross-section for conductor connection: Type: stranded, H07V-R min.: 2.5 mm² max.: 50 mm² nominal: 35 mm² wire end ferrule: Stripping length: min.: 18 mm max.: 18 mm nominal: 18 mm Tightening torque: min.: 4 Nm max.: 5 Nm Connection specification: Screw connection Cross-section for conductor connection: Type: flexible, H05(07) V-K min.: 2.5 mm² max.: 35 mm² nominal: 235 mm² wire end ferrule: Stripping length: min.: 18 mm max.: 18 mm nominal: 18 mm Tightening torque: min.: 4 Nm max.: 5 Nm |
| Clamping range, max. | 50 mm² |
| Clamping range, min. | 2.5 mm² |
| Clamping screw | M 6 |
| Connection cross-section, stranded, max. | 50 mm² |
| Connection cross-section, stranded, min. | 2.5 mm² |
| Connection direction | on side |
| Gauge to IEC 60947-1 | B8 |
| Number of connections | 1 |
| Stripping length | 18 mm |
| Tightening torque, max. | 5 Nm |
| Tightening torque, min. | 4 Nm |
| Type of connection | Screw connection |
| Wire connection cross section AWG, max. | AWG 2 |
| Wire connection cross section AWG, min. | AWG 14 |
| Wire connection cross section, finely stranded, max. | 35 mm² |
| Wire connection cross section, finely stranded, min. | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. | 35 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 35 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 2.5 mm² |
| Wire connection cross-section, solid core, max. | 16 mm² |
| Wire connection cross-section, solid core, min. | 2.5 mm² |
| Installation advice | Busbar |
| Rail | TS 35 |
| Standards | In accordance with IEC 60947-7-1 |
| Wire connection cross section AWG, max. | AWG 2 |
| Wire connection cross section AWG, min. | AWG 14 |
| Rated cross-section | 35 mm² |
| Rated voltage | 400 V |
| Rated DC voltage | 400 V |
| Rated current | 125 A |
| Current at maximum wires | 140 A |
| Standards | In accordance with IEC 60947-7-1 |
| Volume resistance according to IEC 60947-7-x | 0.26 mΩ |
| Rated impulse withstand voltage | 6 kV |
| Power loss in accordance with IEC 60947-7-x | 4 W |
| Pollution severity | 3 |
Reviews
There are no reviews yet.