Interface, RS VERT, 6 P, Tension-clamp connection
Technical Specifications:
| Depth | 75 mm |
| Depth (inches) | 2.953 inch |
| Height | 87 mm |
| Height (inches) | 3.425 inch |
| Width | 122 mm |
| Width (inches) | 4.803 inch |
| Net weight | 264 g |
| Storage temperature | -40…60 °C |
| Operating temperature | -25…50 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Maximum current per distributor connection acc. to UL | 10 A |
| Maximum current per potential connection acc. to UL | 10 A |
| Operating temperature UL, max. | 25 °C |
| Operating temperature UL, min. | 0 °C |
| Total operating current acc. to UL | 60 A |
| Rated voltage UN | 300 V |
| Distribution PCB connectors | LM3NZF 5.08mm |
| Number of potentials | 6 |
| Supply plug-in connectors | TOP 1.5GS2/180 |
| Rated voltage | 250 V AC |
| Operating voltage | 250 V AC |
| Maximum current per potential connection | 20 A |
| Maximum current per distributor connection | 15 A |
| Total operating current | 120 A |
| According to | DIN EN 50178 |
| Rated insulation voltage | <300 V AC |
| Surge voltage category | III |
| Pollution severity level | 2 |
| Pulse voltage test (1,2/50μs) | 4 kV |
| Insulation test voltage AC | 1.2 kV |
| Clamping range, max. | 2.5 mm² |
| Clamping range, min. | 0.13 mm² |
| Flexible with sleeve, max. | 1.5 mm² |
| Flexible with sleeve, min. | 0.25 mm² |
| Flexible, max. H05(07) V-K | 1.5 mm² |
| Flexible, min. H05(07) V-K | 0.2 mm² |
| Max. wire cross-section, AWG | AWG 14 |
| Min. wire cross-section, AWG | AWG 24 |
| Sleeve with plastic collar, max. | 1.5 mm² |
| Solid, max. H05(07) V-U | 2.5 mm² |
| Solid, min. H05(07) V-U | 0.2 mm² |
| Stripping length | 7.5 mm |
| Type of connection | Tension-clamp connection |
| Type of connection | Screw connection |
| Clamping range, min. | 0.13 mm² |
| Clamping range, max. | 6 mm² |
| Solid, min. H05(07) V-U | 0.5 mm² |
| Solid, max. H05(07) V-U | 6 mm² |
| Flexible, min. H05(07) V-K | 0.5 mm² |
| Flexible, max. H05(07) V-K | 4 mm² |
| Flexible with sleeve, max. | 4 mm² |
| Flexible with sleeve, min. | 0.5 mm² |
| Ferrule with plastic collar, max. | 4 mm² |
| Wire cross-section, min. AWG | AWG 26 |
| Wire cross-section, max. AWG | AWG 10 |
| Tightening torque, min. | 0.5 Nm |
| Tightening torque, max. | 0.6 Nm |
| Stripping length | 13 mm |
Reviews
There are no reviews yet.