Interface, RSM, Screw connection
Technical Specifications:
| Depth | 66 mm |
| Depth (inches) | 2.598 inch |
| Height | 87 mm |
| Height (inches) | 3.425 inch |
| Width | 259 mm |
| Width (inches) | 10.197 inch |
| Net weight | 651 g |
| Storage temperature | -40…60 °C |
| Operating temperature | -25…50 °C |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 71d9bdc4-a0b5-4af0-93bd-2ad4e523fb14 |
| Operating temperature UL, max. | 25 °C |
| Operating temperature UL, min. | 0 °C |
| Rated current IN | 33 mA |
| Rated voltage DC UN (supply) | 12 V |
| Rated current (supply) | 1 A |
| Rated voltage DC UN (input) | 12 V |
| Rated voltage AC UN (output) | 250 V |
| Rated current Imax (output) | 4.6 A |
| LED status display per relay | green |
| LED status of the supply voltage | yellow |
| Connection (field side) | LL 5.08 mm |
| Connection on control side | LP 5.08 + plug-in connector in acc. with IEC60603-13 / DIN41651, 20-pin LL 5.08 mm |
| Mechanical service life | 30 x 106 switching cycles |
| Input voltage | 12 V DC ± 10% |
| Input current | 33 mA |
| Relay type | RCL |
| Type of output | Potential-free contact |
| Contact material | AgNi 90/10 |
| Rated voltage | ≤ 250 V AC |
| Max. AC continuous current | 6 A |
| Minimum contact current | 0.1 A |
| Minimum contact voltage | 5 V |
| Pollution severity level | 2 |
| Pulse voltage test (1,2/50μs) | 6 kV |
| Insulation test voltage AC | 1.2 kV |
| Rated input insulation voltage | <50 V AC |
| Rated output insulation voltage | 250 V AC |
| Overvoltage category input/output | III |
| Overvoltage category output/output | II |
| Pollution severity level | 2 |
| Pulse voltage test (1,2/50μs) | 6 kV |
| Insulation test voltage AC | 1.2 kV |
| Clearance input/output | ≥ 5.5 mm |
| Clamping range, max. | 6 mm² |
| Clamping range, min. | 0.5 mm² |
| Flexible with sleeve, max. | 2.5 mm² |
| Flexible with sleeve, min. | 0.5 mm² |
| Flexible, max. H05(07) V-K | 4 mm² |
| Flexible, min. H05(07) V-K | 0.5 mm² |
| Max. wire cross-section, AWG | AWG 12 |
| Min. wire cross-section, AWG | AWG 26 |
| Sleeve with plastic collar, max. | 2.5 mm² |
| Solid, max. H05(07) V-U | 6 mm² |
| Solid, min. H05(07) V-U | 0.5 mm² |
| Stripping length | 6 mm |
| Tightening torque, max. | 0.6 Nm |
| Tightening torque, min. | 0.5 Nm |
| Type of connection | Screw connection |
Reviews
There are no reviews yet.