PE terminal, PUSH IN, Green/yellow, 2.5 mm², 800 V, Number of connections: 2, Number of levels: 1, TS 35, V-0, Wemid
Technical Specifications:
| Depth | 43.6 mm |
| Depth (inches) | 1.717 inch |
| Height | 63.8 mm |
| Height (inches) | 2.512 inch |
| Width | 5.1 mm |
| Width (inches) | 0.201 inch |
| Net weight | 11.323 g |
| Continuous operating temp., min. | -60 °C |
| Continuous operating temp., max. | 130 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Material | Wemid |
| Colour | Green/yellow |
| Colour of operational elements | orange |
| UL 94 flammability rating | V-0 |
| End cover plate required | Yes |
| Number of potentials | 1 |
| Number of levels | 1 |
| Number of clamping points per level | 2 |
| Levels cross-connected internally | No |
| Rail | TS 35 |
| N-function | No |
| PE function | Yes |
| PEN function | No |
| Explosion-tested version | No |
| Snap-on | Yes |
| Type of fixing | TS 35 |
| Type of mounting | TS 35 |
| Connection type, additional connection | PUSH IN |
| Clamping range, max. | 4 mm² |
| Clamping range, min. | 0.5 mm² |
| Connection cross-section, stranded, max. | 4 mm² |
| Connection cross-section, stranded, min. | 0.5 mm² |
| Connection direction | top |
| Number of connections | 2 |
| Stripping length | 10 mm |
| Tube length for twin wire-end ferrule | Tube length: min.: 8 mm max.: 12 mm Cross-section for conductor connection: min.: 0.5 mm² max.: 0.75 mm² |
| Tube length for wire-end ferrule with plastic collar DIN 46228/4 | Tube length: min.: 6 mm max.: 8 mm Cross-section for conductor connection: min.: 0.14 mm² max.: 0.34 mm² Tube length: min.: 6 mm max.: 12 mm Cross-section for conductor connection: min.: 0.5 mm² max.: 1 mm² Tube length: min.: 8 mm max.: 12 mm Cross-section for conductor connection: min.: 1.5 mm² max.: 2.5 mm² |
| Tube length for wire-end ferrule without plastic collar DIN 46228/1 | Tube length: nominal: 5 mm Cross-section for conductor connection: nominal: 0.25 mm² Tube length: min.: 6 mm max.: 10 mm Cross-section for conductor connection: min.: 0.5 mm² max.: 1 mm² Tube length: min.: 7 mm max.: 12 mm Cross-section for conductor connection: min.: 1.5 mm² max.: 2.5 mm² |
| Type of connection | PUSH IN |
| Wire connection cross section AWG, max. | AWG 12 |
| Wire connection cross section AWG, min. | AWG 28 |
| Wire connection cross section, finely stranded, max. | 4 mm² |
| Wire connection cross section, finely stranded, min. | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.5 mm² |
| Wire connection cross-section, solid core, max. | 4 mm² |
| Wire connection cross-section, solid core, min. | 0.5 mm² |
| Rail | TS 35 |
| Standards | IEC 60947-7-2 |
| Wire connection cross section AWG, max. | AWG 12 |
| Wire connection cross section AWG, min. | AWG 28 |
| Rated cross-section | 2.5 mm² |
| Rated voltage | 800 V |
| Rated voltage to adjoining terminal | 800 V |
| Rated DC voltage | 800 V |
| Standards | IEC 60947-7-2 |
| Volume resistance according to IEC 60947-7-x | 1.33 mΩ |
| Pollution severity | 3 |
| Surge voltage category | III |
Reviews
There are no reviews yet.