Hood, 30 V, , LED: No, LED initiator: No, Wiring type: None
Technical Specifications:
| Depth | 57 mm |
| Depth (inches) | 2.244 inch |
| Height | 32.5 mm |
| Height (inches) | 1.28 inch |
| Width | 59.2 mm |
| Width (inches) | 2.331 inch |
| Net weight | 78.82 g |
| Operating temperature | -20 – 90°C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Wire connection method | PUSH IN |
| Conductor O.D., min. | 6 mm |
| Conductor O.D., max. | 12 mm |
| Sheathing stripping length | 100 mm |
| Cable glands | M 20 |
| Clamping range, min. | 0.14 mm² |
| Clamping range, max. | 1.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 16 |
| Solid, min. H05(07) V-U | 0.14 mm² |
| Solid, max. H05(07) V-U | 1.5 mm² |
| Flexible, min. H05(07) V-K | 0.14 mm² |
| Flexible, max. H05(07) V-K | 1.5 mm² |
| w. plastic collar ferrule, DIN 46228 pt 4, min. | 0.28 mm² |
| w. plastic collar ferrule, DIN 46228 pt 4, max. | 1 mm² |
| w. wire end ferrule, DIN 46228 pt 1, min. | 0.25 mm² |
| w. wire end ferrule, DIN 46228 pt 1, max. | 1 mm² |
| Distributor outlet | Hood |
| Rated voltage, min. | 10 V |
| Rated voltage, max. | 30 V |
| Test voltage | 1 kV |
| Max. current-carrying capacity per slot | 4 A |
| Total current | 10 A |
| Current per signal | 2 A |
| Electrical isolation available | No |
| Protection degree | IP68 |
| Pollution severity | 3 |
| Fire behaviour | V-0 |
| Plugging cycles | ≤ 50 |
| LED | No |
| LED initiator | No |
| Housing main material | Pocan |
| Material of distributor | Plastic |
| Housing colour | grey, RAL 7032 |
| Hood sealing material | Viton |
| Screw socket | Nickel-plated CuZn |
| Contact material | CuZn |
| Contact surface | tinned |
| Contact carrier material | PBT (UL 94 V0) |
| Conductor O.D., max. | 12 mm |
| Conductor O.D., min. | 6 mm |
| Suitable for cable carriers | No |
Reviews
There are no reviews yet.