Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 5…48 V DC, Continuous current: 10 A, PUSH IN
Technical Specifications:
| Depth | 89.4 mm |
| Depth (inches) | 3.52 inch |
| Height | 81.5 mm |
| Height (inches) | 3.209 inch |
| Width | 6.4 mm |
| Width (inches) | 0.252 inch |
| Net weight | 28 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -40 °C…60 °C |
| Humidity | 5-85% relative humidity, Tu = 40°C, without condensation |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c |
| REACH SVHC | Lead 7439-92-1 |
| Rated control voltage | 24 V DC ±20 % |
| Power rating | 0.9 W |
| Status indicator | Green LED |
| Protective circuit | Reverse polarity protection |
| Rated switching voltage | 5…48 V DC |
| Continuous current | 10 A |
| Max. switching voltage, AC | 250 V |
| Switch-on delay | 2 ms |
| Switch-off delay | <0.1 ms |
| Load side status indicator | LED red, short-circuit /overload at the output |
| Protective circuit, load side | Varistor Free-wheeling diode Current sensor |
| Contact type | (POWER MOS-FET) |
| Operating altitude | ≤ 2000 m above sea level |
| Rail | TS 35 |
| Colour | black |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage distances for control side – load side | ≥ 6 mm |
| Protection degree | IP20 |
| Stripping length | 9 mm |
| Wire connection method | PUSH IN |
| Stripping length, rated connection | 9 mm |
| Clamping range, rated connection | 1.5 mm² |
| Clamping range, min. | 0.14 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 14 |
| Wire cross-section, solid, min. | 0.5 mm² |
| Wire cross-section, solid, max. | 1.5 mm² |
| Wire cross-section, solid, min. (AWG) | AWG 26 |
| Wire cross-section, solid, max. (AWG) | AWG 14 |
| Wire connection cross section, finely stranded, min. | 0.35 mm² |
| Wire connection cross section, finely stranded, max. | 2.5 mm² |
| Wire cross-section, finely stranded, min. (AWG) | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG) | AWG 14 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.14 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
| Blade size | 0.6 x 3.5 mm |
Reviews
There are no reviews yet.