D-SERIES DRI, Relay socket, Number of contacts: 1, CO contact, Continuous current: 12 A, Screw connection
Technical Specifications:
| Depth | 29.2 mm |
| Depth (inches) | 1.15 inch |
| Height | 73.3 mm |
| Height (inches) | 2.886 inch |
| Width | 15.8 mm |
| Width (inches) | 0.622 inch |
| Net weight | 22 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -40 °C…70 °C |
| Humidity | 35…85 % rel. humidity, no condensation |
| RoHS Compliance Status | Compliant |
| REACH SVHC | No SVHC above 0.1 wt% |
| Rated switching voltage | 250 V AC |
| Continuous current | 12 A |
| Max. switching voltage, AC | 250 V |
| Contact type | 1 CO contact |
| Version | flat design |
| Rail | TS 35 |
| Colour | black |
| UL94 flammability rating component | Component: Housing UL94 flammability rating: V-2 Component: Mounting foot UL94 flammability rating: HB Component: Retaining clip UL94 flammability rating: HB |
| Rated voltage | 250 V |
| Pollution severity | 2 |
| Surge voltage category | III |
| Insulating material group | IIIb |
| Clearance and creepage distances for control side – load side | ≥ 3 mm |
| Dielectric strength for control side – load side | 4 kVeff / 1 Min. |
| Impulse withstand voltage | 4.8 kV (1.2/50 µs) |
| Protection degree | IP20 |
| Wire connection method | Screw connection |
| Stripping length, rated connection | 8 mm |
| Tightening torque, min. | 0.5 Nm |
| Tightening torque, max. | 0.8 Nm |
| Clamping range, rated connection | 1.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire cross-section, solid, min. | 0.5 mm² |
| Wire cross-section, solid, max. | 2.5 mm² |
| Wire connection cross section, finely stranded, min. | 0.5 mm² |
| Wire connection cross section, finely stranded, max. | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
| Wire connection | M3 forked cable lug (insulated) for input connections M3.5 forked cable lug (insulated) for output connections |
| Blade size | size PH1 |
| Product information | For this socket, a cross connection is not available.For this socket, markers are not available. |
Reviews
There are no reviews yet.