D-SERIES DRM, Relay socket, Number of contacts: 2, CO contact, Continuous current: 12 A, PUSH IN
Technical Specifications:
| Depth | 42.7 mm |
| Depth (inches) | 1.681 inch |
| Height | 101.8 mm |
| Height (inches) | 4.008 inch |
| Width | 30.6 mm |
| Width (inches) | 1.205 inch |
| Net weight | 56.936 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -40 °C…55 °C |
| Humidity | 5…85 %, no condensation |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Certificate No. (cURus) | E355547 |
| Rated switching voltage | 250 V AC |
| Continuous current | 12 A |
| Max. switching voltage, AC | 250 V |
| Contact type | 2 CO contact |
| Rail | TS 35 |
| Colour | black |
| UL94 flammability rating component | Component: Retaining clip UL94 flammability rating: HB Component: Mounting foot UL94 flammability rating: HB Component: Pusher UL94 flammability rating: HB Component: Housing UL94 flammability rating: V-2 |
| Rated voltage | 300 V |
| Pollution severity | 2 |
| Surge voltage category | III |
| Insulating material group | IIIb |
| Clearance and creepage distances for control side – load side | ≥ 3 mm |
| Dielectric strength for control side – load side | 4 kVeff / 1 min |
| Dielectric strength of neighbouring contacts | 2.5 kVeff / 1 Min. |
| Dielectric strength of open contact | 2.5 kVeff / 1 Min. |
| Impulse withstand voltage at neighbouring contacts | 4.8 kV (1.2/50 µs) |
| Protection degree | IP20 |
| Certificate No. (cURus) | E355547 |
| Wire connection method | PUSH IN |
| Stripping length, rated connection | 10 mm |
| Clamping range, rated connection | 1.5 mm² |
| Clamping range, min. | 0.14 mm² |
| Clamping range, max. | 1.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 16 |
| Wire cross-section, solid, min. | 0.14 mm² |
| Wire cross-section, solid, max. | 1.5 mm² |
| Wire connection cross section, finely stranded, min. | 0.14 mm² |
| Wire connection cross section, finely stranded, max. | 1.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.14 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.14 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
| Blade size | 0.4 x 2.5 mm |
| Product information | Only connection A2 with the cross-connection SCM/SDI P CC (art. no. 7760056366) can be bridged on this socket. |
Reviews
There are no reviews yet.