TERMOPTO, Solid-state relay, Rated control voltage: 230 V AC +10 %/ -15 % , Rated switching voltage: 5…48 V DC, Continuous current: 0.5 A, Screw connection
Technical Specifications:
| Depth | 55 mm |
| Depth (inches) | 2.165 inch |
| Height | 74.4 mm |
| Height (inches) | 2.929 inch |
| Width | 6.1 mm |
| Width (inches) | 0.24 inch |
| Net weight | 20.6 g |
| Storage temperature | -40 °C…80 °C |
| Operating temperature | -20 °C…60 °C |
| Humidity | 5-95% relative humidity, Tu = 40°C, without condensation |
| MTTF | 2,500 a |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 9e2cbc49-76d9-4611-b8ec-5b4f549a0aa9 |
| Rated control voltage | 230 V AC +10 %/ -15 % |
| Nominal control current | 6.4 mA AC |
| Power rating | ≤ 1.5 VA |
| Status indicator | Green LED |
| Protective circuit | RC element Rectifier |
| Input frequency | 10 Hz |
| Rated switching voltage | 5…48 V DC |
| Continuous current | 0.5 A (DC1) |
| Rated switching current | 500 mA |
| Load category | DC1 |
| Max. switching voltage, DC | 48 V |
| Switch-on delay | <12.6 ms |
| Switch-off delay | <20.8 ms |
| Voltage drop at max. load | <1 V |
| Leakage current | <10 µA |
| Short-circuit-proof | No |
| Protective circuit, load side | Diode circuit |
| Contact type | 1 NO contact (Transistor) |
| max. switching frequency (AC control voltage) | 10 Hz |
| Rail | TS 35 |
| Colour | black |
| UL94 flammability rating component | Component: Housing UL94 flammability rating: V-0 |
| Rated voltage | 300 V |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage distances for control side – load side | > 3 mm |
| Dielectric strength for control side – load side | 1.2 kVeff / 1 min. |
| Impulse withstand voltage | 4 kV (1.2/50 µs) |
| Protection degree | IP20 |
| Certificate no. (cULus) | E223474 |
| Wire connection method | Screw connection |
| Stripping length, rated connection | 9 mm |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.6 Nm |
| Clamping range, rated connection | 2.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 4 mm² |
| Wire connection cross section AWG, min. | AWG 20 |
| Wire connection cross section AWG, max. | AWG 12 |
| Wire cross-section, solid, min. | 0.5 mm² |
| Wire cross-section, solid, max. | 4 mm² |
| Wire connection cross section, finely stranded, min. | 0.5 mm² |
| Wire connection cross section, finely stranded, max. | 2.5 mm² |
| Wire cross-section, finely stranded, min. (AWG) | AWG 20 |
| Wire cross-section, finely stranded, max. (AWG) | AWG 12 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
| Blade size | 0.6 x 3.5 mm |
Reviews
There are no reviews yet.