Weidmueller FSKIT 24VDC 2NO2NC FG LD AGSNO AU

Request a price

FSKIT 24VDC 2NO2NC FG LD AGSNO AU

SKU: 2759080000.0 Category: Brand:

SAFESERIES, Relay module with positively driven contacts 2 NC and 2 NO contacts forcibily guided (EN 61810-3 type A) AgSnO gold-plated, Rated control voltage: 24 V DC ±10 %, Continuous current: 6 A, Screw connection, Test button available: No

Technical Specifications:

Depth 59.8 mm
Depth (inches) 2.354 inch
Height 89.4 mm
Height (inches) 3.52 inch
Width 22.4 mm
Width (inches) 0.882 inch
Net weight 48 g
Storage temperature -40 °C…70 °C
Ambient temperature -25 °C…55 °C
Operating temperature -40 °C…70 °C
Humidity 5…85 % rel. humidity, no condensation
RoHS Compliance Status Compliant with exemption
RoHS Exemption (if applicable/known) 6c, 7cI
REACH SVHC Lead 7439-92-1
SCIP 19f8b897-8687-40cb-b680-a1c1db5fdebc
Ambient temperature (operational), max. 70 °C
Connection cross-section AWG, min. AWG 20
Connection cross-section AWG, max. AWG 16
Type of conductor rigid copper conductor flexible copper conductor
Tightening torque, max. 1 Nm
Rated control voltage 24 V DC ±10 %
Rated current DC 20 mA
Power rating 480 mW
Status indicator Green LED
Protective circuit Free-wheeling diode
Rated switching voltage 250 V AC
Continuous current 6 A
Max. switching frequency at rated load 0.1 Hz
Max. switching voltage, AC 400 V
Max. switching voltage, DC 250 V
Min. switching power 2 mA @ 24 V 10 mA @ 12 V 100 mA @ 5 V
Inrush current 30 A / 20 ms
AC switching capacity (resistive), max. 1500 VA
DC switching capacity (resistive), max. 144 W @ 24 V
Switch-on delay ≤ 20 ms
Switch-off delay ≤ 20 ms
Contact type 2 NC and 2 NO contacts forcibily guided (EN 61810-3 type A) (AgSnO gold-plated)
Mechanical service life 10 x 106 switching cycles
Operating altitude ≤ 2000 m above sea level
Rail TS 35
Test button available No
Mechanical switch position indicator No
Colour Anthracite
UL 94 flammability rating V-2
UL94 flammability rating component Component: Socket UL94 flammability rating: V-2 Component: Relay cover UL94 flammability rating: V-2 Component: Relay baseplate UL94 flammability rating: V-0
Insulation coordination according to IEC 61984
Rated voltage 250 V
Pollution severity 2
Surge voltage category III
Clearance and creepage distances for control side – load side ≥ 3 mm
Dielectric strength for control side – load side 2.5 kVeff/ 1 min
Type of isolation at input and output Basic insulation
Dielectric strength of neighbouring contacts 2.5 kVeff / 1 Min.
Type of isolation at neighbouring contacts Basic insulation
Dielectric strength of open contact 1.5 kVeff /1 min.
Dielectric strength to mounting rail 4 kVeff / 1 Min.
Impulse withstand voltage at input and output 2.5 kV
Impulse withstand voltage at neighbouring contacts 2.5 kV
Protection degree IP10
Certificate no. (cULus) E223474
Wire connection method Screw connection
Stripping length, rated connection 7 mm
Tightening torque, min. 0.4 Nm
Tightening torque, max. 1 Nm
Clamping range, rated connection 1.5 mm²
Clamping range, min. 0.5 mm²
Clamping range, max. 1.5 mm²
Wire connection cross section AWG, min. AWG 20
Wire connection cross section AWG, max. AWG 14
Wire cross-section, solid, min. 0.5 mm²
Wire cross-section, solid, max. 1.5 mm²
Wire cross-section, solid, min. (AWG) AWG 20
Wire cross-section, solid, max. (AWG) AWG 14
Wire connection cross section, finely stranded, min. 0.5 mm²
Wire connection cross section, finely stranded, max. 1.5 mm²
Wire cross-section, finely stranded, min. (AWG) AWG 20
Wire cross-section, finely stranded, max. (AWG) AWG 14
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 0.75 mm²

Reviews

There are no reviews yet.

Be the first to review “Weidmueller FSKIT 24VDC 2NO2NC FG LD AGSNO AU”

Your email address will not be published. Required fields are marked *