Weidmueller MCZ SC 0-20MA

Request a price

MCZ SC 0-20MA

SKU: 8227350000.0 Category: Brand:

Limit value monitoring, Input : 0-20 mA, Output 2 x transistor

Technical Specifications:

Depth 63.2 mm
Depth (inches) 2.488 inch
Height 15 mm
Height (inches) 0.591 inch
Width 6 mm
Width (inches) 0.236 inch
Length 91 mm
Length (inches) 3.583 inch
Net weight 28 g
Storage temperature -25 °C…60 °C
Operating temperature -20 °C…60 °C
Humidity at operating temperature 0…95 % (no condensation)
SIL in compliance with IEC 61508 None
MTTF 681 a
RoHS Compliance Status Compliant with exemption
RoHS Exemption (if applicable/known) 6c, 7a, 7cI
REACH SVHC Lead 7439-92-1
SCIP 35d83707-6a3b-45b5-b9f8-6ba8184c863e
Input current 0.5…20 mA
Input resistance, current 50 Ω
Voltage drop 1 V
Cut-off frequency (-3 dB) 100 Hz
Number of outputs 2
Configuration Potentiometer
Current consumption 15 mA
Nominal power consumption 1.5 VA
Protection degree IP20
Rail TS 35
Step response time <250 µs (switching threshold at 90% of max. input signal; RI ≤ 1 kΩ)
Temperature coefficient ± 250 ppm/K 350 ppm/K
Voltage supply 24 V DC ± 20 %
EMC standards EN 55011 EN 61000-6
Galvanic isolation between input ⁄ output ⁄ supply ⁄ relay
Type of connection TOP connection Screw connection
Clamping range, rated connection 1.5 mm²
Clamping range, min. 0.5 mm²
Clamping range, max. 1.5 mm²
Long specification Trip amplifier for monitoring a 0…20 mA standard signal with two switching outputsTrip amplifier in 6 mm width for analogue 0…20 mA standard signals with two PNP-transistor switch outputs for monitoring an upper and lower threshold (adjustable via potentiometer). Dimensions: L/W/H 91/ 6/ 63.2 mm Tension-clamp connection / Nominal cross-section 1.5 mm2Protection degree: IP 20 Input 0.5…20 mAOutput Double switching output PNP/ 50 mA per channel Adjustable via potentiometerSwitching hysteresis 1 % of input Step response time < 250 us (10…90 %)Temperature coefficient < 250 ppm KAuxiliary power 24 V DC +/- 20 % Ambient temperature range 0°C…+50 °CApprovals cURus, CSA Type MCZ SC 0-20MA
Short specification Trip amplifier for monitoring a 0…20 mA standard signal with two switching outputsTrip amplifier in 6 mm width for analogue 0…20 mA standard signals with two PNP-transistor switch outputs for monitoring an upper and lower threshold (adjustable via potentiometer).

Reviews

There are no reviews yet.

Be the first to review “Weidmueller MCZ SC 0-20MA”

Your email address will not be published. Required fields are marked *