Display, Input : 4-20 mA, (loop powered), HART® transparency, Output : Display
Technical Specifications:
| Depth | 120 mm |
| Depth (inches) | 4.724 inch |
| Height | 48 mm |
| Height (inches) | 1.89 inch |
| Width | 96 mm |
| Width (inches) | 3.78 inch |
| Net weight | 262 g |
| Storage temperature | -20 °C…60 °C |
| Operating temperature | -20 °C…60 °C |
| Humidity | 0…95 % (no condensation) |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c, 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | f4905d12-f516-4eb5-90a8-8c87685bc956 |
| Adjustment of display backlighting | 0% 50% 100% |
| Decimal point | 18888, 1.8888, 18.888, 188.88, 1888.8 |
| Dimmable | Yes |
| Display range | -9999…9999 |
| Display value | Current |
| Scaling | Variable |
| Type | 4-character, LCD display, 16 mm |
| Accuracy | <0.1 % of measuring range |
| Configuration | Front push-button DIP switch to lock / unlock the front push-button |
| DIN Rail compatibility | No |
| HART® transparency supported | Yes |
| Protection degree | IP20 IP65 (in plugged condition) IP65 |
| Step response time | ≤1s |
| Temperature coefficient | ≤ 0.01 °C of measuring range / °C |
| Type of connection | Tension clamp connection with actuator |
| Type of mounting | Frontpanel mounting Front mounting |
| Voltage supply | Loop powered, via 4…20 mA input |
| HART® transparency supported | Yes |
| Input current | 4…20mA |
| Input measurement range | 3.6 … 23 mA (NAMUR NE43 conform) |
| Number of inputs | 1 |
| Response time | ≤ 1 s |
| Sensor | Current source 4- wire sensor (with own power supply) |
| Type of signal forwarding according to HART® | unchanged |
| Voltage drop, current input | without backlight <1.5 V @ 20 mA half backlight <6.5 V @ 20 mA full backlight <10.5 V @ 20 mA |
| Wire connection method | Screw connection |
| Type of connection | Tension clamp connection with actuator |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 14 |
| Wire connection cross section, finely stranded, min. | 0.13 mm² |
| Wire connection cross section, finely stranded, max. | 2.8 mm² |
Reviews
There are no reviews yet.