Supply module, 24 V DC
Technical Specifications:
| Depth | 96.5 mm |
| Depth (inches) | 3.799 inch |
| Height | 125 mm |
| Height (inches) | 4.921 inch |
| Width | 12.2 mm |
| Width (inches) | 0.48 inch |
| Net weight | 78 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -25 °C…70 °C |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | a7fff16c-85aa-4fb0-a206-7be03f41b0b7 |
| Connection system | PUSH IN |
| Current consumption (full load) | 120 mA |
| Current consumption (idle) | 20 mA |
| DC input voltage range | 18…30 V DC |
| Input fuse (internal) | No |
| max. admissible residual ripple at the input | 100 mVpp |
| Rated input voltage | 24 V DC |
| Surge protection | Suppressor diode |
| Connection system | PUSH IN |
| Surge protection | Suppressor diode |
| Conformal coating | Yes |
| Control inputs | Reset |
| MTTF | According to Standard: SN 29500 Operating time (hours), min.: 3,996,000 h Ambient temperature: 40 °C Input voltage: 24 V Duty cycle: 100 % |
| Power loss, idling | 384 mW |
| Power loss, nominal load | 500 mW |
| Protection degree | IP20 |
| Surge voltage category | III |
| Surge voltage category | III |
| Conductor cross-section, AWG/kcmil , max. | 6 AWG |
| Conductor cross-section, AWG/kcmil , min. | 18 AWG |
| Conductor cross-section, flexible , min. | 0.75 mm² |
| Conductor cross-section, rigid , max. | 10 mm² |
| Conductor cross-section, rigid , min. | 0.75 mm² |
| Connection system | PUSH IN |
| Number of terminals | 2 (+,−) |
| Screwdriver blade | 1.2 x 6.5 |
| Wire connection cross section, flexible (input), max. | 16 mm² |
| Conductor cross-section, AWG/kcmil , max. | 12 AWG |
| Conductor cross-section, AWG/kcmil , min. | 26 AWG |
| Conductor cross-section, flexible , max. | 1.5 mm² |
| Conductor cross-section, flexible , min. | 0.14 mm² |
| Conductor cross-section, rigid , max. | 1.5 mm² |
| Conductor cross-section, rigid , min. | 0.14 mm² |
| Connection system | PUSH IN |
| Number of terminals | 2 (I</ Alarm) |
| Screwdriver blade | 0.4 x 2.5 |
| Wire connection cross-section, flexible (signal), max. | 1.5 mm² |
| LED green | Operating voltage OK |
| Red LED | Alarm |
| Transistor output, positive-switching | Alarm |
| Yellow LED | External reset is signalled Alarm is signalled |
Reviews
There are no reviews yet.