Modular housing, OMNIMATE Housing – series CH20M black, Housing base, Recess in detent foot area for BUS contact, Width: 6.1 mm
Technical Specifications:
| Depth | 114.3 mm |
| Depth (inches) | 4.5 inch |
| Height | 110.7 mm |
| Height (inches) | 4.358 inch |
| Width | 6.1 mm |
| Width (inches) | 0.24 inch |
| Net weight | 2.34 g |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Comparative Tracking Index (CTI) | 400 ≤ CTI <600 |
| Insulating material | PBT |
| Insulating material group | II |
| Material | Plastic |
| Surface finish | untreated |
| UL 94 flammability rating | V-0 |
| Colour | black |
| Colour chart (similar) | RAL 9011 |
| Encapsulation option | No |
| Protection degree | IP20 in installed state |
| Rail | TS 35 |
| Number of PCBs, max. | 1 |
| Number of connection levels, max. | 8 |
| Number of poles, max. | 8 |
| Height of components on the PCB, max. | 3.5 mm |
| Type of assembly of the PCB | one-sided |
| According to Standard | DIN EN 61373:1999 (shock and vibration) |
| Test conditions | 50g additional weight on the PCB with endbrackets WEW 35/1 (1059000000) four housings installed in a row |
| Proved axles | X Y Z |
| Shock test | General test advices: All mechanical tests were tested on examplary setup, or in view of depending regulation. The specified results do not replace approval relevant tests. They are just orientation values. Test category: 1 Number of shocks per axle: 3 in positive and negative direction Shock duration: 30 ms Acceleration horizontal: 50 m/s² Acceleration vertical: 50 m/s² Acceleration longitudinal: 50 m/s² |
| Vibration test | Test category: 1B Test duration: 5 hours per axle Effective acceleration: 7.9 m/s² |
| Cut out in clip-on foot area as preperation for | BUS-contact contact not included! |
| Number of connection levels, max. | 8 |
| PCB thickness | 0.8 mm |
| Tolerance for the PCB shape | ±0.1 mm |
| Tolerance of circuit board thickness | ±0.1 mm |
| Alternitive colours | More on request |
| Customer specific cutouts possible | Yes |
| Customer specific labelling possible | Yes |
| Customer specific order process | See guideline under downloads |
Reviews
There are no reviews yet.