Surge protection
Technical Specifications:
| Depth | 64 mm |
| Depth (inches) | 2.52 inch |
| Height | 45 mm |
| Height (inches) | 1.772 inch |
| Width | 18 mm |
| Width (inches) | 0.709 inch |
| Net weight | 116.2 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -40 °C…85 °C |
| Humidity at operating temperature | 5 – 95% rel. humidity |
| MTBF | 15 a |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Certificate No. (cURus) | E3542610000 |
| Acoustic signal | No |
| Colour | orange black |
| Design | Installation housing Insta IP 20 |
| Operating altitude | ≤ 4000 m |
| Optical function display | green = OK; red = arrester is defective – replace |
| Protection degree | IP20 in installed state |
| Rail | TS 35 |
| Version | Surge protection |
| Acoustic signal | No |
| Discharge current Imax (8/20µs) wire-PE | 50 kA |
| Discharge current In (8/20µs) wire-PE | 20 kA |
| Frequency range, max. | 60 Hz |
| Frequency range, min. | 50 Hz |
| Integrated back-up fuse | No |
| Mains voltage | 230 V / 400 V |
| Max. continuous voltage, Uc (AC) | 300 V |
| Number of poles | 1 |
| Protection level Up at IN (L/N-PE) | ≤ 1500 V |
| Protection level, UP wire – PE | 1,500 V |
| Protection level, UP wire – wire | 1,500 V |
| Rated voltage (AC) | 240 V |
| Requirements category acc. to IEC 61643-11 | Type I Type II |
| Requirements class, acc. to EN 61643-11 | T1 T2 |
| Short-circuit current rating ISCCR | 50 kA |
| Standards | IEC61643-11, EN61643-11 |
| Temporary surge voltage (over-voltage) – TOV | 442 V |
| Voltage type | AC |
| Type of connection | Plug-in connection |
| Voltage type | AC |
| Number of poles | 1 |
| Protection degree | IP20 in installed state |
| Colour | orange black |
Reviews
There are no reviews yet.