HDC insert, Male, 830 V, 80 A, Number of poles: 4, Screw connection, Size: 6
Technical Specifications:
| Depth | 84.5 mm |
| Depth (inches) | 3.327 inch |
| Height | 42 mm |
| Height (inches) | 1.654 inch |
| Width | 34 mm |
| Width (inches) | 1.339 inch |
| Net weight | 109 g |
| Limit temperature | -40 °C … 125 °C |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c |
| REACH SVHC | Lead 7439-92-1 Potassium perfluorobutane sulfonate 29420-49-3 |
| SCIP | b67daa31-7dca-434d-8290-da7fb52f83a2 |
| Chemical resistance | Substance: Acetone Chemical resistance: Resistant Substance: Ammonia, watery Chemical resistance: Conditionally resistant Substance: Petrol Chemical resistance: Resistant Substance: Benzene Chemical resistance: Resistant Substance: Diesel oil Chemical resistance: Conditionally resistant Substance: Acetic acid, concentrated Chemical resistance: Resistant Substance: Potassium hydroxide Chemical resistance: Conditionally resistant Substance: Methanol Chemical resistance: Conditionally resistant Substance: Motor oil Chemical resistance: Conditionally resistant Substance: Lye, diluted Chemical resistance: Resistant Substance: Hydrochlorofluorocarbons Chemical resistance: Conditionally resistant Substance: Outdoor use Chemical resistance: Conditionally resistant |
| Height of plug | 42 mm |
| Total length base | 84.5 mm |
| Width | 34 mm |
| BG | 6 |
| Colour | beige |
| Conductor cross-section | 16 mm² |
| Insulating material | PC glass-fibre reinforced (UL-listed and railway-certified) |
| Insulating material group | IIIa |
| Insulation strength | 1010 Ω |
| Low smoke acc. DIN EN 45545-2 | Yes |
| Material | Copper alloy |
| Max. torque for main contact | 3 Nm |
| Min. torque for main contact | 1.5 Nm |
| Number of poles | 4 |
| Number of power contacts | 4 |
| Plugging cycles, silver | ≥ 500 |
| Pollution severity | 3 |
| Rated current (DIN EN 61984) | 80 A |
| Rated impulse voltage (DIN EN 61984) | 8 kV |
| Rated voltage (DIN EN 61984) | 830 V |
| Rated voltage according to UL/CSA | 600 V AC/DC |
| Series | MixMate |
| Size | 6 |
| Surface finish | Silver passivated |
| Type | Male |
| Type of connection | Screw connection |
| UL 94 flammability rating | V-0 |
| Volume resistance | ≤1 mΩ |
| Blade size, slotted (PE connection) | SD 1.2 x 6.5 |
| Connection type PE | Screw connection |
| Fixing screw | M 5 |
| Rated cross-section | 16 mm² |
| Stripping length PE connection | 13 mm |
| Tightening torque, max. PE connection | 2.5 Nm |
| Tightening torque, min. PE connection | 2 Nm |
| Wire cross section, AWG (PE), max. | AWG 6 |
| Wire cross section, AWG (PE), min. | AWG 20 |
| Clamping range, power contact, max. | 16 mm² |
| Clamping range, power contact, min. | 1.5 mm² |
| Number of poles, performance contact | 4 |
| Rated current (DIN EN 61984), power contact | 80 A |
| Rated impulse voltage (DIN EN 61984), power contact | 8 kV |
| Rated voltage (DIN EN 61984), power contact | 830 V |
| Stripping length, performance contact | 15 mm |
| Type of connection, power contact | Screw connection |
| Rated current power circuit (cUR) | Wire connection cross section AWG: AWG 14 Rated current: 15 A Wire connection cross section AWG: AWG 12 Rated current: 25 A Wire connection cross section AWG: AWG 10 Rated current: 29 A Wire connection cross section AWG: AWG 8 Rated current: 33 A Wire connection cross section AWG: AWG 6 Rated current: 35 A |
| Rated current power circuit (UR) | Wire connection cross section AWG: AWG 14 Rated current: 30 A Wire connection cross section AWG: AWG 12 Rated current: 35 A Wire connection cross section AWG: AWG 10 Rated current: 50 A Wire connection cross section AWG: AWG 8 Rated current: 70 A Wire connection cross section AWG: AWG 6 Rated current: 80 A |
| Rated current signal circuit (cUR) | Wire connection cross section AWG: AWG 14 Rated current: 12 A |
| Rated current signal circuit (UR) | Wire connection cross section AWG: AWG 14 Rated current: 16 A |
| BG | 6 |
| Blade size, slotted (screw connection) | 1.0 x 5.5 mm |
| Clamping screw | M 6 |
| Conductor cross-section, max. | 16 mm² |
| Conductor cross-section, min. | 1.5 mm² |
| Material | Copper alloy |
| Max. torque for main contact | 3 Nm |
| Min. torque for main contact | 1.5 Nm |
| Size | 6 |
| Stripping length, rated connection | 15 mm |
| Surface finish | Silver passivated |
| Type of connection | Screw connection |
| Volume resistance | ≤1 mΩ |
| Wire connection cross section AWG, max. | AWG 6 |
| Wire connection cross section AWG, min. | AWG 16 |
| Wire connection cross section, finely stranded, max. | 16 mm² |
| Wire connection cross section, finely stranded, min. | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 16 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.5 mm² |
| Wire cross-section, solid, max. | 16 mm² |
| Wire cross-section, solid, min. | 0.5 mm² |
Reviews
There are no reviews yet.