D-SERIES DRW / DRH, Relay, Number of contacts: 1, NC contact with blow-out magnet AgSnO, Rated control voltage: 110 V DC, Continuous current: 16 A, Flat blade connections (4.8 mm x 0.5 mm), Test button available: Yes
Technical Specifications:
| Depth | 48 mm |
| Depth (inches) | 1.89 inch |
| Height | 36 mm |
| Height (inches) | 1.417 inch |
| Width | 36 mm |
| Width (inches) | 1.417 inch |
| Net weight | 83.3 g |
| Storage temperature | -40 °C…60 °C |
| Operating temperature | -40 °C…60 °C |
| Humidity | 5…85 % rel. humidity, no condensation |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Certificate No. (cURus) | E312083 |
| Rated control voltage | 110 V DC |
| Rated current DC | 13 mA |
| Power rating | 1.5 W |
| Coil resistance | 8400 Ω ± 10 % |
| Status indicator | Green LED |
| Rated switching voltage | 500 V AC |
| Continuous current | 16 A |
| Max. switching frequency at rated load | 0.1 Hz |
| Max. switching voltage, AC | 400 V |
| Max. switching voltage, DC | 300 V |
| Min. switching power | 100 mA @ 12 V |
| Inrush current | 80 A / 50 ms |
| AC switching capacity (resistive), max. | 8000 VA |
| DC switching capacity (resistive), max. | 2200 W @ 220 V |
| Switch-on delay | < 20 ms |
| Switch-off delay | < 20 ms |
| Contact type | 1 NC contact with blow-out magnet (AgSnO) |
| Mechanical service life | 10 x 106 switching cycles |
| Test button available | Yes |
| Version of test button | Lockable test button Momentary test button |
| Mechanical switch position indicator | Yes |
| Colour | Transparent |
| UL94 flammability rating component | Component: Housing UL94 flammability rating: V-2 Component: Relay baseplate UL94 flammability rating: V-0 Component: Relay status indicator UL94 flammability rating: HB Component: Relay test button UL94 flammability rating: HB |
| Insulation coordination according to | EN 61810-1:2008 |
| Rated voltage | 500 V |
| Pollution severity | 3 |
| Surge voltage category | III |
| Insulating material group | IIIa |
| Clearance and creepage distances for control side – load side | ≥ 8 mm |
| Dielectric strength for control side – load side | 4 kVeff / 1 min |
| Protection degree | IP20 |
| Certificate No. (cURus) | E312083 |
| Wire connection method | Flat blade connections (4.8 mm x 0.5 mm) |
Reviews
There are no reviews yet.