Supply module, Distributes supply voltage to rail bus
Technical Specifications:
| Depth | 114.3 mm |
| Depth (inches) | 4.5 inch |
| Height | 112.5 mm |
| Height (inches) | 4.429 inch |
| Width | 6.1 mm |
| Width (inches) | 0.24 inch |
| Net weight | 83 g |
| Storage temperature | -20 °C…85 °C |
| Ambient temperature | -25 °C…70 °C |
| Operating temperature | -20 °C…60 °C |
| Humidity | 40 °C / 95 % rel. humidity, no condensation |
| SIL in compliance with IEC 61508 | None |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 2f6dd957-421a-46db-a0c2-cf1609156924 |
| Input current | 0.5…2.5 A DC |
| Input voltage | 21.6…26.4 V DC |
| Number of inputs | 1 |
| Number of outputs | 1 |
| Output current | Equivalent to input current 2.5 A |
| Output voltage, note | Corresponds to the input voltage |
| Supply voltage (output) | 24 V DC |
| Configuration | none |
| Power consumption, max. | 1 W |
| Protection degree | IP20 |
| Rail | TS 35 CH20M Bus |
| Voltage supply | 21.6…26.4 V DC |
| EMC standards | EN 61326-1 |
| Type of connection | Screw connection |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.6 Nm |
| Clamping range, rated connection | 2.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire connection cross section AWG, min. | AWG 30 |
| Wire connection cross section AWG, max. | AWG 14 |
| Product information | The ACT20-FEED-IN-BASIC-S device supplies the Weidmüller CH20M DIN-rail bus with an externally connected supply voltage of 24V DC ± 30%. The current-carrying capacity of the power- feed device is 2.5 A max.The input current must be limited to this maximum value. |
Reviews
There are no reviews yet.