Serial interface converter, Input : serial RS232 signal, Output : RS485/422, Voltage supply: 24 V DC ± 20 %
Technical Specifications:
| Depth | 114.2 mm |
| Depth (inches) | 4.496 inch |
| Height | 117.2 mm |
| Height (inches) | 4.614 inch |
| Width | 22.5 mm |
| Width (inches) | 0.886 inch |
| Net weight | 154 g |
| Storage temperature | -40 °C…80 °C |
| Operating temperature | -20 °C…70 °C |
| Humidity | 5…95 %, no condensation |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 6,6′-di-tert-butyl-2,2′-methylenedi-p-cresol 119-47-1 |
| SCIP | 2f6dd957-421a-46db-a0c2-cf1609156924 |
| Type | RS232 |
| Addressing | automatic DIP switch |
| Assignment | DTE/DCE switchable with DIP switch |
| Baud rate | 2.4 / 4.8 / 9.6 / 19.2 / 57.6 / 115.2 kBaud |
| Bit delay | ≤ 3 µs |
| Bit distortion | <5 % |
| Communication | Bi-directional |
| Connection type | SUB-D9 (male plug) |
| Control of data direction | Automatic or via RS232 RTS/CTS |
| Interface | 1 x serial RS-232/RS-485/RS-422 |
| Number of devices on the bus, max. | 32 |
| Parity | even |
| Protocol | Serial data transfer |
| Transmission rate | 9.600 bps 19.2 kBit/s 115.2 kBit/s 8 bit or 8 bit + parity bit |
| Type | RS232 |
| Bit delay (RS485/422) | <3 µs |
| Bit distortion (RS485/422) | <5 % |
| Connection type (plug socket) | Screw connection |
| Control of data direction (RS485/422) | automatic or via RS232 RTS/CTS |
| Number of Hardware-interfaces RS-485 | 1 |
| Transmission length, max. (RS485/422) | 1,200 m |
| Type of protocol of serial interface | RS485 |
| Type | RS485/422 |
| Applications | Convert RS232 signal to RS485/422 signal Realization of longer cable lengths with RS485 Networking with multiple participants |
| Configuration | DIP switch |
| Installation advice | Indoors only |
| Nominal power consumption | 1.2 VA |
| Operating altitude | ≤ 2000 m |
| Power consumption | ≤ 1.5 W |
| Protection degree | IP20 |
| Rail | TS 35 |
| Voltage supply | 24 V DC ± 20 % |
| EMC standards | EN 61326 |
| Galvanic isolation | 3-way isolator |
| Insulation voltage input or output/supply | 2 kV DC / 1 min. |
| Pollution severity | 2 |
| Surge voltage category | II |
| Type of connection | Screw connection |
| Stripping length, rated connection | 8 mm |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.6 Nm |
| Wire connection cross section, finely stranded, min. | 0.2 mm² |
| Wire connection cross section, finely stranded, max. | 2 mm² |
| Wire cross-section, finely stranded, min. (AWG) | AWG 24 |
| Wire cross-section, finely stranded, max. (AWG) | AWG 14 |
| Product information | The interface converter is intended for use in RS232/RS485/422 systems in an industrial environment. Depending on the use case, different functions can be realised with the device, see section “Applications”. |
Reviews
There are no reviews yet.