Temperature converter, 2-/3-wire connection technology, Output current loop powered, Tension-clamp connection, Output : 4-20 mA
Technical Specifications:
| Depth | 63.2 mm |
| Depth (inches) | 2.488 inch |
| Net weight | 29 g |
| Operating temperature | 70 °C |
| SIL in compliance with IEC 61508 | None |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c, 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 35d83707-6a3b-45b5-b9f8-6ba8184c863e |
| Number of inputs | 1 |
| Sensor | PT100 (3 wire) |
| Sensor supply | 0.8 mA / 9…30 V DC |
| Temperature input range | 0…160 °C |
| Load impedance current | ≤ 600 Ω |
| Number of outputs | 1 |
| Output current | 4…20 mA (current loop) at 9…30V DC |
| Accuracy | ± 0.2 % of measuring range |
| Configuration | none |
| Long-term drift | 0 |
| Nominal power consumption | 2 VA |
| Protection degree | IP20 |
| Rail | TS 35 |
| Step response time | 10 ms |
| Voltage supply | 24…30 V DC Output loop powered |
| EMC standards | EN 61000-6 |
| Galvanic isolation | Without isolation |
| Type of connection | Tension-clamp connection |
| Clamping range, rated connection | 1.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 1.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 16 |
| Wire cross-section, solid, min. | 0.5 mm² |
| Wire cross-section, solid, max. | 1.5 mm² |
| Wire cross-section, solid, min. (AWG) | AWG 26 |
| Wire cross-section, solid, max. (AWG) | AWG 16 |
| Wire connection cross section, finely stranded, min. | 0.5 mm² |
| Wire connection cross section, finely stranded, max. | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG) | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG) | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
Reviews
There are no reviews yet.