Capacity module
Technical Specifications:
| Depth | 150 mm |
| Depth (inches) | 5.905 inch |
| Height | 130 mm |
| Height (inches) | 5.118 inch |
| Width | 34 mm |
| Width (inches) | 1.339 inch |
| Net weight | 724 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -25 °C…70 °C |
| Humidity | 5…95 %, no condensation |
| RoHS Compliance Status | Compliant |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | c9dca554-f123-4c2f-a680-5a7631aa9527 |
| DC current consumption | 25 mA @24 V after charging process |
| DC input voltage range | 18…30 V DC |
| Rated input voltage | 24 V DC |
| Wire connection method | Screw connection |
| Peak current output | load dependent (typ. 40 A for 1 ms) |
| Recovery time for the capacitor | Approx. 1 sec. |
| Switching thresholds | 21.6 V DC, relay is on for Power Good 20.4 V DC, relay is off for Power Fail |
| Voltage monitoring | Yes |
| Wire connection method | Screw connection |
| Humidity | 5…95 %, no condensation |
| Mounting position, installation notice | Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
| MTBF | According to Standard: SN 29500 Operating time (hours), min.: 7,390,000 h Ambient temperature: 25 °C Input voltage: 24 V Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 3,249,000 h Ambient temperature: 40 °C Input voltage: 24 V Duty cycle: 100 % |
| Power loss, idling | 600 mW |
| Protection degree | IP20 |
| Interference immunity test acc. to | EN 61000-4-2 (ESD)EN 61000-4-3 and EN 61000-4-8 (fields)EN 61000-4-4 (burst)EN 61000-4-5 (surge)EN 61000-4-6 (conducted)EN 61000-4-11 (dips) |
| Noise emission in accordance with EN55032 | Class B |
| Shock resistance IEC 60068-2-27 | 15 g In all directions |
| Vibration resistance IEC 60068-2-6 | 1 g according to EN 50178 |
| Insulation voltage | 0.5 kV Input / output – Box |
| Pollution severity | 2 |
| Protection class | III, with no ground connection, for SELV |
| Electrical machine equipment | Acc. to EN60204 |
| For use with electronic equipment | Acc. to EN50178 / VDE0160 |
| Conductor cross-section, AWG/kcmil , max. | 12 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , min. | 0.5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Number of terminals | 4 (++–) |
| Wire connection cross section, flexible (input), max. | 4 mm² |
| Conductor cross-section, AWG/kcmil , max. | 12 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , max. | 2.5 mm² |
| Conductor cross-section, flexible , min. | 0.5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Number of terminals | 3 (CO contacts) |
| Floating contact | Yes |
Reviews
There are no reviews yet.