Weidmueller DRI314024L

Request a price

DRI314024L

SKU: 7760056304.0 Category: Brand:

D-SERIES DRI, Relay, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 10 A, Flat blade connections (4.7 mm x 0.5 mm), Test button available: No

Technical Specifications:

Depth 28 mm
Depth (inches) 1.102 inch
Height 31 mm
Height (inches) 1.22 inch
Width 13 mm
Width (inches) 0.512 inch
Net weight 19 g
Storage temperature -40 °C…85 °C
Operating temperature -40 °C…55 °C
Humidity 35…85 % rel. humidity, no condensation
RoHS Compliance Status Compliant without exemption
REACH SVHC No SVHC above 0.1 wt%
Certificate No. (cURus) E312083
Rated control voltage 24 V DC
Rated current DC 21,8 mA
Power rating 530 mW
Coil resistance 1100 Ω ± 10 %
Status indicator Green LED
Rated switching voltage 250 V AC
Continuous current 10 A
Max. switching frequency at rated load 0.1 Hz
Max. switching voltage, AC 250 V
Max. switching voltage, DC 250 V
Min. switching power 10 mA @ 24 V 10 mA @ 12 V 100 mA @ 5 V
AC switching capacity (resistive), max. 2500 VA
DC switching capacity (resistive), max. 240 W @ 24 V
Switch-on delay ≤ 15 ms
Switch-off delay ≤ 10 ms
Contact type 1 CO contact (AgSnO)
Mechanical service life 10 x 106 switching cycles
Test button available No
Mechanical switch position indicator No
Colour Transparent
UL94 flammability rating component Component: Relay cover UL94 flammability rating: V-2 Component: Relay baseplate UL94 flammability rating: V-0
Rated voltage 300 V
Pollution severity 2
Surge voltage category III
Insulating material group IIIa
Clearance and creepage distances for control side – load side ≥ 4 mm
Dielectric strength for control side – load side 5 kVeff / 1min
Dielectric strength of open contact 1 kVeff / 1 min
Impulse withstand voltage 5 kV (1.2/50 µs)
Protection degree IP20
Certificate No. (cURus) E312083
Wire connection method Flat blade connections (4.7 mm x 0.5 mm)

Reviews

There are no reviews yet.

Be the first to review “Weidmueller DRI314024L”

Your email address will not be published. Required fields are marked *