HDC enclosures, Size: 2, Protection degree: IP65 (in plugged condition), Cable entry from top, Plug housing, End-locking clamp, lower side, Standard, Size of cable entries: PG 11
Technical Specifications:
| Depth | 72.5 mm |
| Depth (inches) | 2.854 inch |
| Height | 54 mm |
| Height (inches) | 2.126 inch |
| Width | 32.5 mm |
| Width (inches) | 1.28 inch |
| Net weight | 98 g |
| Limit temperature | -40 °C … 125 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Chemical resistance | Substance: Acetone Chemical resistance: Conditionally resistant Substance: Drilling oil Chemical resistance: Resistant Substance: Diesel Chemical resistance: Resistant Substance: Ethyl alcohol Chemical resistance: Resistant Substance: Transmission oil Chemical resistance: Resistant Substance: Hydraulic oil Chemical resistance: Resistant Substance: Coolant Chemical resistance: Resistant Substance: Petroleum benzine Chemical resistance: Resistant Substance: Sweat Chemical resistance: Resistant Substance: Premium gasoline Chemical resistance: Conditionally resistant Substance: Water Chemical resistance: Resistant Substance: UV Chemical resistance: Unstable Substance: Ozone Chemical resistance: Unstable |
| Cable entry | w. thread |
| Height of housing B | 54 mm |
| Total length housing | 63 mm |
| Width housing C | 29.5 mm |
| EMC housings | No |
| Housing main material | diecast aluminium |
| Material of locking element | Stainless steel, rust-proof |
| Protection degree | IP65 (in plugged condition) |
| Surface finish | Powder coating |
| Tightening torque | 0.5 Nm |
| BG | 2 |
| Cable entry | w. thread |
| Clamp version | End-locking clamp |
| Colour (RAL) | RAL 7035 |
| Design | Standard |
| Design of housing | Cable entry from top Plug housing |
| Design of locking system | End-locking clamp, lower side |
| Internal thread | PG 11 |
| Number of cable entry on top | 2 |
| Number of cable entry sideways | 0 |
| Sealing | NBR |
| Size | 2 |
| Size of cable entries | PG 11 |
| Suitable for ModuPlug® | No |
| Tightening torque | 0.5 Nm |
| Top part/bottom part/lid | upper part |
| Type | Plug |
Reviews
There are no reviews yet.