System cable, RJ45 IP 20, RJ45 IP 20, Cat.5 (ISO/IEC 11801), PVC, 5 m
Technical Specifications:
| Length | 5 m |
| Length (inches) | 196.85 inch |
| Net weight | 207 g |
| Operating temperature | -40 °C…75 °C |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Generic communication cable facilities | ISO / IEC 11801:2002 EN 50173-1:2007 |
| Standard, assembly | UL-Style 2879 (80°C/30V) |
| Standard, insulating material | DIN EN 50290-2-23 (VDE 0819) Table 2/A (HD 624.3) |
| Standard, shielding material | DIN EN 13602 Cu-ETP-A..B |
| Standard, wire material | DIN EN 13602 Cu-ETP-A |
| PoE / PoE+ | conforming to IEEE 802.3at |
| Connector standard | IEC 60603-7-51 |
| Connector standard | IEC 60603-7-51 |
| Generic communication cable facilities | ISO / IEC 11801:2002 EN 50173-1:2007 |
| Standard, assembly | UL-Style 2879 (80°C/30V) |
| Standard, insulating material | DIN EN 50290-2-23 (VDE 0819) Table 2/A (HD 624.3) |
| Standard, shielding material | DIN EN 13602 Cu-ETP-A..B |
| Standard, wire material | DIN EN 13602 Cu-ETP-A |
| Arrangement of wire cores | Twisted pair |
| Colour sequence or wires – wire pairs | white/blue – blue, white/orange – orange, white/green – green, white/brown – brown |
| Complete shielding | Shielding braid made from copper wiring |
| Cross-section | 4*2*AWG 26/7 – 4*2*0.128 mm² |
| Diameter of wire pair | 2.4 mm |
| Insulation | PE |
| Insulation cross-section | 0.98 mm |
| Material sheath | PVC |
| Number of wires | 8 |
| Overlap of shielding braid | 70 % |
| Sheath diameter, max. | 5.8 mm |
| Sheath diameter, min. | 5.4 mm |
| Sheathing colour | green (RAL 6018) |
| Sheathing material thickness | 0.5 mm |
| Shielding | SF/UTP |
| Shielding braid thickness | 0.1 mm |
| Standard designations | LI02YSCY 4X2X0.15 PIMF GN SF/UTP |
| Strands | 7 |
| Wire core insulation thickness | 0.25 mm |
| Wire material | Stranded tin-plated copper wire |
| Wire pair shielding | Aluminium foil Plastic foil |
| Capacity at 1 kHz | 48 nF/km |
| Category | Cat.5 (ISO/IEC 11801) |
| Characteristic impedance | 100 ± 5 Ω at 100MHz |
| Delay skew | 25 ns/100m |
| Loop resistance | 150 Ω/km |
| Operating voltage (UL rating) | 30 V |
| Operating voltage, UL | 30 V |
| Resistance differential | 3 % |
| Shield attenuation | 55 dB at 30–600 MHz |
| Signal propagation time | 5.13 ns/m |
| Test voltage wire-wire-shield | 750 V DC, 1 min |
| Transfer impedance | 15 mΩ/m at 1 MHz 20 mΩ/m at 10 MHz 30 mΩ/m at 30 MHz |
| Transmission rate | 10/100 MBit/s 1000 MBit/s |
| Abrasion resistance | good |
| Halogen | Yes |
| Min. bending radius, once only | 5 x cable diameter |
| Min. bending radius, repetitive | 10 x cable diameter |
| Resistance to spread of flame | in accordance with IEC 60332-1 |
| Plug left | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
| Plug right | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
| Plug left | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
| Plug right | RJ45, IP20, male contact, straight, plug, Plastic, shielded |
Reviews
There are no reviews yet.