MCZ SERIES, Solid-state relay, Rated control voltage: 230 V AC +5 % / -15 % , Rated switching voltage: 5…48 V DC, Continuous current: 20 mA, Tension-clamp connection
Technical Specifications:
| Depth | 63.2 mm |
| Depth (inches) | 2.488 inch |
| Height | 91 mm |
| Height (inches) | 3.583 inch |
| Width | 6.1 mm |
| Width (inches) | 0.24 inch |
| Net weight | 24 g |
| Storage temperature | -40 °C…60 °C |
| Operating temperature | -25 °C…40 °C |
| Humidity | 40 °C / 93 % rel. humidity, no condensation |
| MTTF | 2,135 a |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 6,6′-di-tert-butyl-2,2′-methylenedi-p-cresol 119-47-1 |
| SCIP | 35d83707-6a3b-45b5-b9f8-6ba8184c863e |
| Certificate No. (cURus) | E141197 |
| Rated control voltage | 230 V AC +5 % / -15 % |
| Nominal control current | 10 mA AC ±20 % |
| Power rating | 2.3 VA |
| Status indicator | Green LED |
| Protective circuit | Rectifier |
| Input frequency | AC: 5 Hz duty factor 1:2 |
| Rated switching voltage | 5…48 V DC |
| Continuous current | 0.02 A |
| Max. switching voltage, AC | 250 V |
| Pulse load, max. current | <150 mA / 10 ms |
| Switch-on delay | ≤ 30 ms |
| Switch-off delay | ≤ 40 ms |
| Voltage drop at max. load | 1.6 V |
| Leakage current | ≤ 1 mA |
| Short-circuit-proof | No |
| Protective circuit, load side | Free-wheeling diode |
| Contact type | 1 NO contact (Transistor) |
| max. switching frequency (AC control voltage) | 5 Hz |
| Rail | TS 35 |
| Test button available | No |
| Colour | beige |
| UL94 flammability rating component | Component: Housing UL94 flammability rating: V-0 |
| Rated voltage | 300 V |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage distances for control side – load side | ≥ 5.5 mm |
| Dielectric strength for control side – load side | 1 kVeff / 1 s |
| Dielectric strength to mounting rail | 4 kVeff / 1 Min. |
| Impulse withstand voltage | 6 kV (1.2/50 µs) |
| Protection degree | IP20 |
| Certificate No. (CSA) | 154685-1198742 |
| Certificate No. (cURus) | E141197 |
| Wire connection method | Tension-clamp connection |
| Stripping length, rated connection | 8 mm |
| Clamping range, rated connection | 1.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 1.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 16 |
| Wire cross-section, solid, min. | 0.5 mm² |
| Wire cross-section, solid, max. | 1.5 mm² |
| Wire cross-section, solid, min. (AWG) | AWG 26 |
| Wire cross-section, solid, max. (AWG) | AWG 16 |
| Wire connection cross section, finely stranded, min. | 0.5 mm² |
| Wire connection cross section, finely stranded, max. | 1.5 mm² |
| Wire cross-section, finely stranded, min. (AWG) | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG) | AWG 16 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
| Blade size | 0.6 x 3.5 mm |
Reviews
There are no reviews yet.