Weidmueller SAKH 35 EP/SW

Request a price

SAKH 35 EP/SW

SKU: 1596240000.0 Category: Brand:

Feed-through terminal block, Screw connection, black, 35 mm², 125 A, 1000 V, Number of connections: 2

Technical Specifications:

Depth 87.5 mm
Depth (inches) 3.445 inch
Height 74 mm
Height (inches) 2.913 inch
Width 23 mm
Width (inches) 0.906 inch
Net weight 141.7 g
Storage temperature -25 °C…55 °C
Ambient temperature -5 °C…40 °C
Continuous operating temp., min. -60 °C
Continuous operating temp., max. 160 °C
RoHS Compliance Status Compliant without exemption
REACH SVHC No SVHC above 0.1 wt%
Material Epoxy resin, EP
Colour black
UL 94 flammability rating V-0
Certificate No. (ATEX) TUEV18ATEX8206U
Certificate No. (IECEX) IECEXTUR18.0016U
Max. voltage (ATEX) 1100 V
Current (ATEX) 125 A
Wire cross section max. (ATEX) 35 mm²
Max. voltage (IECEX) 1100 V
Current (IECEX) 125 A
Wire cross section max. (IECEX) 35 mm²
Marking EN 60079-7 Ex eb II C Gb
Ex 2014/34/EU label II 2 G D
Version Screw connection One end without connector
End cover plate required No
Number of potentials 1
Number of levels 1
Number of clamping points per level 2
Number of potentials per tier 1
Levels cross-connected internally No
PE connection No
Rail TS 32
N-function No
PE function No
PEN function No
Explosion-tested version Yes
Number of similar terminals 1
Open sides closed
Type of mounting Snap-on
Connection type, additional connection Screw connection
Blade size 6.5 x 1.2 mm
Clamping range, max. 50 mm²
Clamping range, min. 4 mm²
Clamping screw M 6
Connection cross-section, stranded, max. 50 mm²
Connection cross-section, stranded, min. 16 mm²
Connection direction on side
Gauge to IEC 60947-1 B8
Number of connections 2
Stripping length 18 mm
Tightening torque, max. 4.4 Nm
Tightening torque, min. 2.5 Nm
Twin wire-end ferrules, max. 16 mm²
Twin wire-end ferrules, min. 1.5 mm²
Type of connection Screw connection
Wire connection cross section AWG, max. AWG 2
Wire connection cross section AWG, min. AWG 12
Wire connection cross section, finely stranded, max. 35 mm²
Wire connection cross section, finely stranded, min. 4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 35 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 2.5 mm²
Wire connection cross-section, solid core, max. 16 mm²
Wire connection cross-section, solid core, min. 4 mm²
Certificate No. (CSA) 200039-1501714
Current size B (CSA) 125 A
Current size C (CSA) 125 A
Current size D (CSA) 5 A
Voltage size B (CSA) 600 V
Voltage size C (CSA) 1500 V
Voltage size D (CSA) 600 V
Wire cross section max. (CSA) 2 AWG
Wire cross section min. (CSA) 12 AWG
Rail TS 32
Standards IEC 60947-7-1
Wire connection cross section AWG, max. AWG 2
Wire connection cross section AWG, min. AWG 12
Rated cross-section 35 mm²
Rated voltage 1,000 V
Rated DC voltage 1,000 V
Rated current 125 A
Current at maximum wires 150 A
Standards IEC 60947-7-1
Volume resistance according to IEC 60947-7-x 0.26 mΩ
Rated impulse withstand voltage 8 kV
Power loss in accordance with IEC 60947-7-x 4 W
Pollution severity 3
Certificate No. (UR) E60693
Current size B (UR) 115 A
Current size C (UR) 115 A
Current size D (UR) 5 A
Voltage size B (UR) 600 V
Voltage size C (UR) 600 V
Voltage size D (UR) 600 V
Wire cross section max. (UR) 2 AWG
Wire cross section min. (UR) 12 AWG

Reviews

There are no reviews yet.

Be the first to review “Weidmueller SAKH 35 EP/SW”

Your email address will not be published. Required fields are marked *