SAFESERIES, Safety relay,24 V DC ± 20%, 35 mA , Max. switching current, internal fuse : 5 A (refer to derating curve), SIL 3, EN 61508:2010
Technical Specifications:
| Depth | 114.1 mm |
| Depth (inches) | 4.492 inch |
| Height | 117.3 mm |
| Height (inches) | 4.618 inch |
| Width | 22.5 mm |
| Width (inches) | 0.886 inch |
| Net weight | 177 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -25 °C…50 °C |
| Humidity | 40 °C / 93 % rel. humidity, no condensation |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 807f1906-ce90-4f93-8801-4b128b343e6b |
| Connection designation (safety circuit) | A1 A2 |
| Rated control voltage | 24 V DC ± 20% |
| Current consumption | 42 mA |
| Guaranteed current consumption of 24 VDC -10% | 35 mA |
| Inrush current | ≤170 mA |
| Status indicator | LED yellow |
| Protective circuit | Reverse polarity protection Free-wheeling diode |
| Connection designation (safety output) | 13 14 15 |
| Contact design | 1 x de-energised to safe (NO contact) |
| Contact base material | AgNi 0.15 gold flashed |
| Max. permitted switching voltage | 250 V AC / 30 V DC |
| Max. permitted switching current | 5 A |
| Max. switching current, internal fuse | 5 A (refer to derating curve) |
| Max. switching current, external fuse | 5 A (refer to derating curve) |
| Max. switching capacity | 1250 VA |
| Internal fuse | 5 A time-lag |
| External back-up fuse | 5 A time-lag |
| Short circuit resistance | No |
| Switch-on time | typ. 7 ms |
| Switch-off time | typ. 14 ms |
| Min. switching capacity | 10 mA @ 12 V |
| Device type | A |
| Tproof | 12 a |
| Hardware fault tolerance (HFT) | 2 |
| Safety category | SIL 3 |
| Safety standard | EN 61508:2010 |
| Operating altitude | ≤ 2000 m above sea level |
| Rail | TS 35 |
| Colour | black yellow |
| Noxious gas resistance to EN 60068-2-60 | Yes (art. No.: 1304040000 only) |
| Rated voltage | 300 V |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage distances for control side – load side | ≥ 5.5 mm |
| Dielectric strength for control side – load side | 4 kVeff / 1 min |
| Dielectric strength to mounting rail | 4 kVeff / 1 Min. |
| Impulse withstand voltage | 6 kV (1.2/50 µs) |
| Protection degree | IP20 |
| Standards | EN 61000 EN 61326-3-2 |
| Certificate no. (cULus) | E223474 |
| Wire connection method | Screw connection |
| Stripping length, rated connection | 8 mm |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.6 Nm |
| Clamping range, rated connection | 1.5 mm² |
| Clamping range, min. | 0.13 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 12 |
| Wire cross-section, solid, min. | 0.2 mm² |
| Wire cross-section, solid, max. | 2.5 mm² |
| Wire connection cross section, finely stranded, min. | 0.2 mm² |
| Wire connection cross section, finely stranded, max. | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.2 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.2 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 2.5 mm² |
| Blade size | size PH0 |
Reviews
There are no reviews yet.