TERMSERIES-compact, Solid-state relay, Rated control voltage: 24…110 V DC -30 / +25 % , Rated switching voltage: 5…110 V DC, Continuous current: 250 mA, PUSH IN
Technical Specifications:
| Depth | 62.5 mm |
| Depth (inches) | 2.461 inch |
| Height | 89.4 mm |
| Height (inches) | 3.52 inch |
| Width | 6.4 mm |
| Width (inches) | 0.252 inch |
| Net weight | 27.2 g |
| Storage temperature | -40 °C…85 °C |
| Operating temperature | -40 °C…70 °C |
| Humidity | 5-85% relative humidity, Tu = 40°C, without condensation |
| MTTF | 2,551 a |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| Rated control voltage | 24…110 V DC -30 / +25 % |
| Rated control voltage (control input) | 24…110 V DC -30 / +25 % |
| Rated current DC | 1.9 mA @ 24 V DC 3.2 mA @ 110 V DC |
| Power rating | 46 mW @ 24 V DC 352 mW @ 110 V DC |
| Status indicator | Green LED |
| Protective circuit | Reverse polarity protection |
| Input frequency | 10 Hz |
| Rated switching voltage | 5…110 V DC |
| Continuous current | 0.25 A |
| Max. switching frequency at rated load | 0.1 Hz |
| Inrush current | 3.4 mA @ 24 V DC 11.4 mA @ 110 V DC |
| Switch-on delay | <4 ms |
| Switch-off delay | <150 ms |
| Protective circuit, load side | Suppressor diode Free-wheeling diode |
| Contact type | NO contact (Transistor) |
| Operating altitude | ≤ 2000 m above sea level |
| Version | for railway applications |
| Rail | TS 35 |
| Test button available | No |
| Mechanical switch position indicator | No |
| Colour | black |
| UL 94 flammability rating | V-0 |
| UL94 flammability rating component | Component: Housing UL94 flammability rating: V-0 Component: Relay status indicator UL94 flammability rating: V-0 Component: Pusher UL94 flammability rating: V-0 |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage distances for control side – load side | 8 mm |
| Dielectric strength for control side – load side | 2.5 kVeff |
| Type of isolation at input and output | reinforced insulation |
| Dielectric strength to mounting rail | 4 kVeff / 1 Min. |
| Impulse withstand voltage | 6 kV (1.2/50 µs) |
| Protection degree | IP20 |
| Stripping length | 9 mm |
| Wire connection method | PUSH IN |
| Stripping length, rated connection | 9 mm |
| Clamping range, rated connection | 1.5 mm² |
| Clamping range, min. | 0.14 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 14 |
| Wire cross-section, solid, min. | 0.5 mm² |
| Wire cross-section, solid, max. | 1.5 mm² |
| Wire cross-section, solid, min. (AWG) | AWG 26 |
| Wire cross-section, solid, max. (AWG) | AWG 14 |
| Wire connection cross section, finely stranded, min. | 0.35 mm² |
| Wire connection cross section, finely stranded, max. | 2.5 mm² |
| Wire cross-section, finely stranded, min. (AWG) | AWG 26 |
| Wire cross-section, finely stranded, max. (AWG) | AWG 14 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0.14 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 1.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 1.5 mm² |
| Blade size | 0.6 x 3.5 mm |
Reviews
There are no reviews yet.