Weidmueller TRS 24VUC 2CO PB

Request a price

TRS 24VUC 2CO PB

SKU: 2988450000.0 Category: Brand:

TERMSERIES, Relay module, Number of contacts: 2, CO contact AgNi, Rated control voltage: 24 V UC ±10 %, Continuous current: 8 A, Screw connection, Test button available: Yes

Technical Specifications:

Depth 97.5 mm
Depth (inches) 3.839 inch
Height 89.6 mm
Height (inches) 3.528 inch
Width 12.8 mm
Width (inches) 0.504 inch
Net weight 63 g
Storage temperature -40 °C…70 °C
Operating temperature -40 °C…60 °C
Humidity 5…85 % rel. humidity, no condensation
RoHS Compliance Status Compliant with exemption
RoHS Exemption (if applicable/known) 7a, 7cI
REACH SVHC Lead 7439-92-1
SCIP 9e2cbc49-76d9-4611-b8ec-5b4f549a0aa9
Connection cross-section AWG, min. AWG 26
Connection cross-section AWG, max. AWG 14
Type of conductor rigid copper conductor flexible copper conductor
Tightening torque, max. 0.4 Nm
Pollution severity level 2
Rated control voltage 24 V UC ±10 %
Power rating 410 mW
Status indicator Green LED
Protective circuit Free-wheeling diode Reverse polarity protection
Coil voltage of the replacement relay deviating from the rated control voltage No
Coil voltage of the replacement relay 24 V DC
Rated switching voltage 250 V AC
Continuous current 8 A
Max. switching frequency at rated load 0.1 Hz
Max. switching voltage, AC 250 V
Max. switching voltage, DC 250 V
Inrush current 30 A / 4 s
AC switching capacity (resistive), max. 2000 VA
DC switching capacity (resistive), max. 192W @ 24V
Switch-on delay ≤ 15 ms
Switch-off delay ≤ 16 ms
Contact type 2 CO contact (AgNi)
Mechanical service life 5 x 106 switching cycles
Operating altitude ≤ 2000 m above sea level
Rail TS 35
Test button available Yes
Version of test button Lockable test button Momentary test button
Mechanical switch position indicator Yes
Colour black
UL94 flammability rating component Component: Housing UL94 flammability rating: V-0 Component: Pusher UL94 flammability rating: V-0 Component: Retaining clip UL94 flammability rating: V-0
Rated voltage 300 V
Pollution severity 2
Surge voltage category III
Clearance and creepage distances for control side – load side ≥ 5.5 mm
Dielectric strength for control side – load side 2.5 kVeff / 1 Min.
Dielectric strength of open contact 1 kVeff / 1 min
Dielectric strength to mounting rail 4 kVeff / 1 Min.
Impulse withstand voltage 6 kV (1.2/50 µs)
Impulse withstand voltage at neighbouring contacts 4 kV (1.2/50 µs)
Protection degree IP20
Certificate no. (cULus) E141197
Wire connection method Screw connection
Stripping length, rated connection 8 mm
Tightening torque, max. 0.4 Nm
Clamping range, rated connection 1.5 mm²
Clamping range, min. 0.14 mm²
Clamping range, max. 2.5 mm²
Wire connection cross section AWG, min. AWG 26
Wire connection cross section AWG, max. AWG 14
Wire cross-section, solid, min. 0.14 mm²
Wire cross-section, solid, max. 2.5 mm²
Wire cross-section, solid, min. (AWG) AWG 26
Wire cross-section, solid, max. (AWG) AWG 14
Wire connection cross section, finely stranded, min. 0.14 mm²
Wire connection cross section, finely stranded, max. 2.5 mm²
Wire cross-section, finely stranded, min. (AWG) AWG 26
Wire cross-section, finely stranded, max. (AWG) AWG 14
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min. 0.25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max. 1.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min. 0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max. 1 mm²
Blade size SD 0.6 x 3.5

Reviews

There are no reviews yet.

Be the first to review “Weidmueller TRS 24VUC 2CO PB”

Your email address will not be published. Required fields are marked *