Weidmueller VPU AC I 1 N-PE 305/50 LH

Request a price

VPU AC I 1 N-PE 305/50 LH

SKU: 3037010000.0 Category: Brand:

Surge protection, Single-phase, TN, TT nur für N-PE

Technical Specifications:

Depth 70 mm
Depth (inches) 2.756 inch
Height 90 mm
Height (inches) 3.543 inch
Width 18 mm
Width (inches) 0.709 inch
Net weight 122 g
Storage temperature -40 °C…85 °C
Operating temperature -40 °C…85 °C
Humidity at operating temperature 5 – 95% rel. humidity
MTBF 15 a
RoHS Compliance Status Compliant without exemption
REACH SVHC No SVHC above 0.1 wt%
Certificate No. (cURus) E3542610000
Acoustic signal No
Colour black orange blue
Operating altitude ≤ 4000 m
Optical function display green = OK; red = arrester is defective – replace
Protection degree IP20 in installed state
Rail TS 35
UL 94 flammability rating V-0
Version Surge protection
Pollution severity 2
Surge voltage category IV
Acoustic signal No
Discharge current Imax (8/20µs) N-PE 100 kA
Discharge current In (8/20µs) N-PE 50 kA
Energy coordination (≤10 m) Type I Type II Type III
Follow-on current extinguishing capability Ifi Not available due for technical reasons
Frequency range, max. 60 Hz
Frequency range, min. 50 Hz
Fuse Not required
Integrated back-up fuse No
Leakage current at Un 1 µA
Lightning test current, Iimp (10/350 µs) (N-PE) 100 kA
Low voltage network Single-phase TN TT nur für N-PE
Mains voltage 230 V / 400 V
Max. continuous voltage, Uc (N-PE) 305 V
Number of poles 1
Protection level Up at IN (N-PE) ≤ 1.5 kV
Protection level, UP wire – PE 1,500 V
Protection level, UP wire – wire 1,500 V
Rated load current IL 100 A
Rated voltage (AC) 230 V
Requirements category acc. to IEC 61643-11 Type I Type II
Requirements class, acc. to EN 61643-11 T1 T2
Response time ≤ 100 ns
Short-circuit current rating ISCCR 0.1 kA
Signalling contact No
Standards IEC 61643-11 EN 61643-11 UL 1449
Temporary surge voltage (over-voltage) – TOV 442 V
Voltage type AC
Stripping length 18 mm
Wire connection method Screw connection
Type of connection Screw connection
Stripping length, rated connection 18 mm
Tightening torque, min. 3 Nm
Tightening torque, max. 4.5 Nm
Clamping range, rated connection 16 mm²
Clamping range, min. 1.5 mm²
Clamping range, max. 35 mm²
Wire cross-section, solid, min. 1.5 mm²
Wire cross-section, solid, max. 35 mm²
Wire connection cross section, finely stranded, max. 35 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min. 2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max. 35 mm²
Connection cross-section, stranded, min. 1.5 mm²
Connection cross-section, stranded, max. 35 mm²
Voltage type AC
Number of poles 1
Protection degree IP20 in installed state
Colour black orange blue
Time interval 5 years
Product information For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V
Product images

Reviews

There are no reviews yet.

Be the first to review “Weidmueller VPU AC I 1 N-PE 305/50 LH”

Your email address will not be published. Required fields are marked *