Weidmueller VPU AC I 3+MOV R 950/12.5

Request a price

VPU AC I 3+MOV R 950/12.5

SKU: 2845570000.0 Category: Brand:

Surge voltage arrester, Low voltage, Surge protection, with remote contact, TN-C, IT without N

Technical Specifications:

Depth 91 mm
Depth (inches) 3.583 inch
Height 90 mm
Height (inches) 3.543 inch
Width 54 mm
Width (inches) 2.126 inch
Net weight 780 g
Storage temperature -40 °C…85 °C
Operating temperature -40 °C…85 °C
Humidity 5 – 95% rel. humidity
RoHS Compliance Status Compliant without exemption
REACH SVHC No SVHC above 0.1 wt%
Connection type PUSH IN
Cross-section for connected wire, solid core, max. 1.5 mm²
Cross-section for connected wire, solid core, min. 0.14 mm²
Stripping length 8 mm
Colour orange black
Design Installation housing; 4TE Insta IP 20
Operating altitude ≤ 2000 m
Optical function display green = OK; red = arrester is defective – replace
Protection degree IP20 in installed state
Rail TS 35
Segment Power distribution
UL 94 flammability rating V-0
Version Surge protection with remote contact
Pollution severity 2
Surge voltage category IV
Discharge current Imax (8/20µs) wire-PE 50 kA
Discharge current In (8/20µs) wire-PE 20 kA
Energy coordination (≤10 m) Type I Type II Type III
Follow-on current extinguishing capability Ifi 25 kA
Frequency range, max. 60 Hz
Frequency range, min. 50 Hz
Fuse 160 A gG
Integrated back-up fuse No
Leakage current at Un 0.6 mA
Lightning test current Iimp (10/350 µs) (L-PE) 12.5 kA
Low voltage network TN-C IT without N
Max. continuous voltage, Uc (AC) 950 V
Number of poles 3
Protection level Up at IN (L/N-PE) ≤ 4 kV
Rated voltage (AC) 800 V
Requirements category acc. to IEC 61643-11 Type I Type II
Requirements class, acc. to EN 61643-11 T1 T2
Response time ≤ 25 ns
Short-circuit current rating ISCCR 25 kA
Signalling contact 250 V 1A 1CO
Standards IEC 61643-11 EN 61643-11
Voltage type AC
Stripping length 18 mm
Wire connection method Screw connection
Type of connection Screw connection
Stripping length, rated connection 18 mm
Tightening torque, min. 3 Nm
Tightening torque, max. 4.5 Nm
Clamping range, rated connection 16 mm²
Clamping range, min. 6 mm²
Clamping range, max. 35 mm²
Wire cross-section, solid, min. 2.5 mm²
Wire cross-section, solid, max. 35 mm²
Wire connection cross section, finely stranded, min. 2.5 mm²
Wire connection cross section, finely stranded, max. 35 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min. 6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max. 35 mm²
Connection cross-section, stranded, min. 2.5 mm²
Connection cross-section, stranded, max. 35 mm²
Voltage type AC
Number of poles 3
Protection degree IP20 in installed state
Colour orange black
Time interval 5 years
Product images

Reviews

There are no reviews yet.

Be the first to review “Weidmueller VPU AC I 3+MOV R 950/12.5”

Your email address will not be published. Required fields are marked *