Weidmueller WDU 50N SW

Request a price

WDU 50N SW

SKU: 1298070000.0 Category: Brand:

Feed-through terminal block, Screw connection, black, 50 mm², 150 A, 1000 V, Number of connections: 2

Technical Specifications:

Depth 69.6 mm
Depth (inches) 2.74 inch
Depth including DIN rail 70.6 mm
Height 70 mm
Height (inches) 2.756 inch
Width 18.5 mm
Width (inches) 0.728 inch
Net weight 84.5 g
Storage temperature -25 °C…55 °C
Ambient temperature -5 °C…40 °C
Continuous operating temp., min. -60 °C
Continuous operating temp., max. 130 °C
RoHS Compliance Status Compliant without exemption
REACH SVHC No SVHC above 0.1 wt%
Product Carbon Footprint Cradle to gate: 1.098 kg CO2eq.
Material Wemid
Colour black
UL 94 flammability rating V-0
Certificate No. (ATEX) DEMKO14ATEX1338U
Certificate No. (IECEX) IECEXULD14.0005U
Max. voltage (ATEX) 690 V
Current (ATEX) 126 A
Wire cross section max. (ATEX) 50 mm²
Max. voltage (IECEX) 690 V
Current (IECEX) 126 A
Wire cross section max. (IECEX) 50 mm²
Marking EN 60079-7 Ex eb II C Gb
Ex 2014/34/EU label II 2 G D
Version Screw connection for screwable cross-connection in closed state
End cover plate required No
Number of potentials 1
Number of levels 1
Number of clamping points per level 2
Number of potentials per tier 1
Levels cross-connected internally No
PE connection No
Rail TS 35
N-function No
PE function No
PEN function Yes
Cross-section for connected wire, stranded, two clampable wires, max. 16 mm²
Cross-section for connected wire, stranded, two clampable wires, min. 6 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 16 mm²
Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min. 6 mm²
Wire connection cross section, finely stranded, two clampable wires, min. 6 mm²
Wire cross-section, finely stranded, two clampable wires, max. 16 mm²
Explosion-tested version No
Installation advice Direct mounting
Open sides closed
Type of mounting Snap-on
Connection type, additional connection Screw connection
Blade size S4 (DIN 6911)
Clamping range, max. 70 mm²
Clamping range, min. 10 mm²
Clamping screw M 6
Connection cross-section, stranded, max. 70 mm²
Connection cross-section, stranded, min. 6 mm²
Connection direction on side
Gauge to IEC 60947-1 B10
Number of connections 2
Stripping length 24 mm
Tightening torque, max. 6 Nm
Tightening torque, min. 3.5 Nm
Type of connection Screw connection
Wire connection cross section AWG, max. AWG 0
Wire connection cross section AWG, min. AWG 8
Wire connection cross section, finely stranded, max. 50 mm²
Wire connection cross section, finely stranded, min. 10 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 50 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 6 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 50 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 10 mm²
Wire connection cross-section, solid core, max. 16 mm²
Wire connection cross-section, solid core, min. 6 mm²
Installation advice Direct mounting
Rail TS 35
Standards IEC 60947-7-1
Wire connection cross section AWG, max. AWG 0
Wire connection cross section AWG, min. AWG 8
Rated cross-section 50 mm²
Rated voltage 1,000 V
Rated DC voltage 1,000 V
Rated current 150 A
Current at maximum wires 192 A
Standards IEC 60947-7-1
Volume resistance according to IEC 60947-7-x 0.21 mΩ
Rated impulse withstand voltage 8 kV
Power loss in accordance with IEC 60947-7-x 4.8 W
Pollution severity 3
Surge voltage category III
Product images

Reviews

There are no reviews yet.

Be the first to review “Weidmueller WDU 50N SW”

Your email address will not be published. Required fields are marked *